Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

- - -

profile picture
Brit1275
Posts: 5972 - Karma: 11









170cm
130/100/120

shhhhhh............
--------------------------------
Dont worry, its a controlled slide.
Dec 1 2004 4:46PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
$600 a pair if you want some
--------------------------------
Dont worry, its a controlled slide.
Jan 3 2005 3:17PM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
dude, if you just got dumped wouldnt that give you more time?

hahaha just kidding... ya i knew they were fatter just didnt know how much fatter, there not a whole lot more then BC's is what im tryin to show.
Jan 3 2005 5:13PM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
Your not making the backs any stiffer then the fronts right? just symetrical?

Jan 3 2005 5:26PM
0 0
profile picture
Crystalrossi
Posts: 804 - Karma: 11
how many pairs you think you will make? If you made some that were about 180 I would think of buying some
------------------

DETONATION

----------

NWFT
Jan 3 2005 5:56PM
0 0
profile picture
snowsnowsnow
Posts: 3343 - Karma: 23
600 dolers a pair! didnt u say u made them for around 200?? i kno the 600 dollers includes labor and evrething, but if ur looking to get something started, id say a starting price shud be a little less than that...but maybe im wrong
hoose is a p i m p
Jan 3 2005 6:24PM
0 0
profile picture
NBCskier
Posts: 3877 - Karma: -289
how are u making these?
SGB

'how about u call it a double grab? or a japical or critinap'-pussyfooter
Jan 3 2005 6:33PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
I do not plan on making more of these and selling them, I'm not going into ski manufacturing, I'm going into Aeronautical Engineering. That's not to say I don't want to go into this, who knows, I'm willing to go wherever life takes me.

However, seeing how much research, development, design, and labor I've put in to these, I'm not so keen on letting any go. But, if the price was right ($600 or more) I would be more than willing to sell a pair.

This was all just a joke cause I couldn't afford new skis, a joke I took all too seriously. So sorry, but unfortunately I will not be making any in 180. I am only making 4 skis, with the hope of getting a good pair out of the 4. If all goes perfect, then I'll have two backups in case the worst happens. Unless someone really wants to drop a load on them.

As far as the stiffness goes... well, lets see. Although I do have the knowledge and education to analyze this all properly, do I really want to? nope. The stiffness gradient I guess you could call it will be basically symetrical down the length of the ski. Its determined mostly by the thickness of the wood, since the fiberglass and carbon fiber are uniform the whole way down. The skis have a linear taper to them, from the waist to the tips, and so the stiffness should vary more or less linearly. The waist is not the center of the ski, it is slightly back (did not want to center mount these)
--------------------------------
Dont worry, its a controlled slide.
Jan 3 2005 8:33PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
oh, and as to how I'm making them, I won't say too much now. Once they are all finished, I'll put up a detailed thread showing the whole process from design to completion!

You'll like it!
--------------------------------
Dont worry, its a controlled slide.
Jan 3 2005 8:35PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
Compressible Aerodynamics
Structural Vibrations
Aerospace Structures
Aerospace Structures Laboratory
Seminar class
Working evenings for City of Kirkland
Building my own skis

Sean Richardson - making lazy people feel like shit since 1983.


--------------------------------
Dont worry, its a controlled slide.
Jan 3 2005 8:37PM
0 0
profile picture
Crystalrossi
Posts: 804 - Karma: 11
yeah that would be really interestig to take a look at. especially since i might be able to do something very similar for an engineering project at my school, then i can make my 180's.
------------------

DETONATION

----------

NWFT
Jan 3 2005 9:27PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
where do you go to school? Are you in engineering? What kind?
--------------------------------
Dont worry, its a controlled slide.
Jan 3 2005 9:57PM
0 0
profile picture
NBCskier
Posts: 3877 - Karma: -289
sounds cool
SGB

'how about u call it a double grab? or a japical or critinap'-pussyfooter
Jan 3 2005 10:43PM
0 0
profile picture
kevywevy
Posts: 6292 - Karma: 13
good luck finding edges!


________________________________________

''huckbunni, i would appreciate it if you never ever, spoke again, becuase quite frankly your comments are wasted megabytes that would literally be better used to show videos of a cat playing with string.'' -APE
Jan 3 2005 11:17PM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
haha no im not questioning your knowledge, just wondering how your setting up the ski, its pretty easy to just stick more material in the tail of the ski to make it stiffer, so there really wasn't anyway to know judging from your eariler posts and pics... Unfortunatly, I think you'll find carbon fiber is nothing more then 'bling bling' on skis, but you'll get to know composites, and that will pay off big in aeronautics. Have fun
Jan 3 2005 11:18PM
0 0
profile picture
Crystalrossi
Posts: 804 - Karma: 11
i go to the university of portland and am studying engineering management. i may switch to some other type of engineering though, dont really know yet
------------------

DETONATION

----------

NWFT
Jan 3 2005 11:35PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
the carbon fiber is most definately bling bling on these skis, it really provides basically NO more stiffness, hahahahaha.

but god damn this stuff is sexy!
--------------------------------
Dont worry, its a controlled slide.
Jan 3 2005 11:36PM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
Yes, yes it is
Jan 3 2005 11:43PM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
And im getting into engineering too, but im heading up to Western, theres not much of a program up there, so I'll probably just get some general degree, then head over to Montana State for my masters. Yay Big Sky!
Jan 3 2005 11:46PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
doesn't western have a really good mechanical engineering department? I thought I heard that somewhere. They have like an automotive thing, or something, and use composites a lot I know.
--------------------------------
Dont worry, its a controlled slide.
Jan 4 2005 12:16AM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
Yeah there getting better, there getting a ton of grants... but its nothing compared to other schools, I think they have about 7 or 8 engineering programs there... damn hippies.
Jan 4 2005 12:19AM
0 0
profile picture
Crystalrossi
Posts: 804 - Karma: 11
i heard a little abbout their automotive program too. that sounds pretty cool. i almost ended up going there
------------------

DETONATION

----------

NWFT
Jan 4 2005 12:28AM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
Yeah its the Vehicle Research Institute(VRI) But, like I said, damn hippies... they make solar panelled cars and then go drive them around the city in australia... which wouldn't be such a bad gig... maybe test drive a REAL sti.
Jan 4 2005 12:38AM
0 0
profile picture
NWBakerBoy
Posts: 681 - Karma: 13
university of portland is gunna hae such a good cc team....kinda off subject but true
---------------

Hey honey, take a walk on the wild side
Jan 4 2005 1:00AM
0 0
profile picture
Crystalrossi
Posts: 804 - Karma: 11
yeah that and the soccer team are the good sports, you know someone on the cc team or something?
------------------

DETONATION

----------

NWFT
Jan 4 2005 1:37AM
0 0
profile picture
dlite!
Posts: 1194 - Karma: 87
yo you shod make a blank white ski, w/ no edges..


hookers hit the dome like an eight of shrooms
Jan 4 2005 11:28AM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
yes, blank white ski with no edges.

I forgot to tell you guys, these skis are cross country skis.


just kidding.


--------------------------------
Dont worry, its a controlled slide.
Jan 4 2005 12:25PM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
xcountry skiiers would love to have ski's that fat!


just kidding
Jan 5 2005 12:26AM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
hahahahaha, cross country skiers would love to NOT be cross country skiers!!!


(for the record, I have never gone cross country, and would probably only last about 5 minutes before I'd be too exhausted, so I do give credit to them. us downhillers have it easy, point down hill and watch the scenery)
--------------------------------
Dont worry, its a controlled slide.
Jan 5 2005 1:48PM
0 0
profile picture
NWBakerBoy
Posts: 681 - Karma: 13
not really, they just have dave kinsella(got 2nd in state, went to inglemoor), Michael quackenbush(9th) and colin longmuir(hella fast from woodinville). in two years they will be money
---------------

Hey honey, take a walk on the wild side
Jan 5 2005 6:54PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
what the fuck are you talking about? I'm so confused.


Ordered new brakes for my bindings just now, those should arrive in a few days. I was lucky enough that Tyrolia makes bindings for skis up to 115mm wide! Few! Cause I was already trying to bend out my brakes that I have now (only fit around a ski up to like 30mm wide!!! hahaha) and that wasn't working!
--------------------------------
Dont worry, its a controlled slide.
Jan 5 2005 8:18PM
0 0
profile picture
kevywevy
Posts: 6292 - Karma: 13
i think hes talking about cross country runners? i don't know?


________________________________________

''huckbunni, i would appreciate it if you never ever, spoke again, becuase quite frankly your comments are wasted megabytes that would literally be better used to show videos of a cat playing with string.'' -APE
Jan 6 2005 12:23AM
0 0
profile picture
Crystalrossi
Posts: 804 - Karma: 11
yeah he was talking about cross country down at UP
------------------

DETONATION

----------

NWFT
Jan 6 2005 1:45AM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
cause thats completely relevant in this thread....
--------------------------------
Dont worry, its a controlled slide.
Jan 6 2005 2:01PM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
maybe he got confused when I said xcountry?
Jan 6 2005 6:11PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
haha, i think so.


Sidewalls are all prepared. They are white ABS that wrap around the entire ski (two halves, left and right, with a joint at either end of the ski).






--------------------------------
Dont worry, its a controlled slide.
Jan 6 2005 6:45PM
0 0
profile picture
NBCskier
Posts: 3877 - Karma: -289
saaweet
SGB

'how about u call it a double grab? or a japical or critinap'-pussyfooter
Jan 6 2005 6:45PM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
Damn those look sweet... whens it gonna be all dry?
Jan 6 2005 7:44PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
nothing's glued there, I just used the small nails so I could get the sidewalls trimmed and curved right. I put the base and edges on the big board, put a bunch of nails on it, and bend the sidewalls in there.

Tomorrow I finish the press, and saturday I make the first ski (hopefully)
--------------------------------
Dont worry, its a controlled slide.
Jan 6 2005 7:56PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
kind of a funny (and lucky) note here:

the sidewalls I got from the same generous people I got the edge material and p-tex from.

They were just long pieces used for some other ski. Originally I was going to have it go to just before where the tips bend up, and have something else go the rest of the way, but couldn't figure out what that something else was. So I thought I'd test fit to see if the sidewalls could reach from tip-to-tip (as I have them there). They did, with only 2mm extra!!!! If that didn't fit, I basically would've been screwed. I have NO idea what I would've done. That is BIG TIME luck there. This will be the best construction, and the best looks! Easiest too.

The skis will be thick at the tips though, I was going to shave the sidewalls down about 2mm, but decided there was no good way to do that (sander would just melt the ABS). So the tips will be around 1/4inch or so. Meh! These things are gonna be STIFF
--------------------------------
Dont worry, its a controlled slide.
Jan 6 2005 8:01PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
god damn, I'm getting so excited for these skis. Just looking at the pictures is making me all giddy!!!

They're gonna be SO FUCKING COOL!!!!!!!!
--------------------------------
Dont worry, its a controlled slide.
Jan 6 2005 8:03PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
Ok, design is now final-final-finalized.

A few days ago I noticed a major discrepancy that really would've fucked up the first pair of skis and the press. Luckily I noticed it, changed the design, and now everything looks good.

Here is a final render of the actual design, white sidewalls and all (just pretend the top is carbon fiber, too much work to put it on there)





Copy that squirrly control, you are go for molding.
--------------------------------
Dont worry, its a controlled slide.
Jan 7 2005 12:36AM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
Sick, I wish I had ninja skills like that.
=================================
Rowen

'Aren't you Buzz Lightyear?'
*whispers* 'I love your movies!'
'URAAAAFWAAAGAAA!!!'
Jan 7 2005 3:43AM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
word of advice.....



DON'T EVER MAKE YOUR OWN SKIS

I wouldn't say that if my bandsaw's blade hadn't broken at 1am today, as we were TOTALLY on a roll! Then BAM, ruins our flow.

Oh well, tomorrow morning we'll finish the first ski (or fail)
--------------------------------
Dont worry, its a controlled slide.
Jan 9 2005 3:25AM
0 0
profile picture
kevywevy
Posts: 6292 - Karma: 13
stupid skis, i wanna go skiing tomorrow, not sand and cut skis out!!!


________________________________________

''huckbunni, i would appreciate it if you never ever, spoke again, becuase quite frankly your comments are wasted megabytes that would literally be better used to show videos of a cat playing with string.'' -APE
Jan 9 2005 3:34AM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
leaning towards fail, but we'll see in a few days

--------------------------------
Dont worry, its a controlled slide.
Jan 9 2005 9:33PM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
what the hell were you cutting with the bandsaw??
Jan 9 2005 10:12PM
0 0
profile picture
Brit1275
Posts: 5972 - Karma: 11
the sad thing is NOTHING. we were cutting all night with it, then we were going to cut the shape of the core out, and as we were walking over to the bandsaw (already running) it just snapped.

got a wider blade today and it worked better anyways.


Here's the ski in the press with Kevin tightening it:



here's the design for comparison:


--------------------------------
Dont worry, its a controlled slide.
Jan 9 2005 10:19PM
0 0
profile picture
kevywevy
Posts: 6292 - Karma: 13
I WANT MORE PICS!!!


________________________________________

''huckbunni, i would appreciate it if you never ever, spoke again, becuase quite frankly your comments are wasted megabytes that would literally be better used to show videos of a cat playing with string.'' -APE
Jan 9 2005 10:39PM
0 0
profile picture
laughdamon
Posts: 1133 - Karma: 10
That is sick, how longs it gonna take to set? its a 24 hour epoxy right?
Jan 10 2005 1:06AM
0 0
profile picture
Crystalrossi
Posts: 804 - Karma: 11
all i have to say is that is fucking awesome
------------------

DETONATION

----------

NWFT
Jan 10 2005 2:09AM
0 0
All times are Eastern (-5)