Natural Selection Ski | Full Broadcast in 12 hours

Member of the Month

X_MEMESWERVE_XX
March, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Bindings brake help

profile picture
CHRIS-
Posts: 32 - Karma: 94
I am not familiar with mounting bindings so hopefully someone can help. I have a pair of 90mm griffons and I would like to mount them on my new skis that are 106 width. Can I buy 110mm brakes and change the brakes on my old bindings? If so would whoever is mounting my bindings be able to change those out for me?

thank you in advance
4 months ago
1 1
profile picture
Static
Posts: 8588 - Karma: 4,098
Ask Jeeves
4 months ago
1 3
profile picture
BallClapper
Posts: 3674 - Karma: 16,537
Brakes should be wider than the ski. 110 is perfect. (You can switch them out)
4 months ago
2 3
profile picture
elm.
Posts: 1510 - Karma: 13,605
You can swap brakes on nearly every popular binding
4 months ago
1 0
profile picture
Michigan_Sucks
Posts: 518 - Karma: 7,351
BallClapperBrakes should be wider than the ski. 110 is perfect. (You can switch them out)


That's a quick way to snag a brake on a carve. Binding should be 5mm less than width.
4 months ago
1 3
profile picture
officechair
Posts: 349 - Karma: 2,853
The wider brake will work on the same binding and 110mm brake on a 106mm ski will be fine.

**This post was edited on Dec 30th 2024 at 3:53:35pm
4 months ago
2 0
profile picture
Juviticus
Posts: 441 - Karma: 2,190
Michigan_SucksThat's a quick way to snag a brake on a carve. Binding should be 5mm less than width.


Depends on the brake Imo. Pivots brakes should be narrower, marker royal fam should be wider, everything else is give or take like 8mm and you'll be fine. I tend to go narrower with everything except Marker brakes
4 months ago
2 0
profile picture
PartyBullshiit
Posts: 4638 - Karma: 19,569
Pretty sure they make a 100mm brake for those which will work perfect with a little stretch. Any shop can do this for you.
4 months ago
1 1
profile picture
JFU
Posts: 89 - Karma: 732
Michigan_SucksThat's a quick way to snag a brake on a carve. Binding should be 5mm less than width.


Exact way that I bent one of my brakes + skiing bumps. You can always bend a smaller brake out, But you can't bend a larger one in.
3 months ago
1 0
All times are Eastern (-4); Currently it's 6:57AM