Member of the Month

abjectwoe
May, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

What camera was teddybear crisis filmed on?

profile picture
hi_vis360
Posts: 5332 - Karma: 55,408
I know it’s 16 mm film but what camera did they use?
6 months ago
3 0
profile picture
hi_vis360
Posts: 5332 - Karma: 55,408
Or IDEA? @InspiredMedia
6 months ago
0 0
profile picture
InspiredMedia
Posts: 527 - Karma: 41,596
I used a Arri M and the other filmer used a Arri SB.

I believe Kris Ostness, one of the creators of TBC always used a Bolex... but i might be wrong.
6 months ago
9 0
profile picture
hi_vis360
Posts: 5332 - Karma: 55,408
InspiredMediaI used a Arri M and the other filmer used a Arri SB.

I believe Kris Ostness, one of the creators of TBC always used a Bolex... but i might be wrong.


Thanks iberg! Knew you would have the 16 mm lore down
6 months ago
1 0
profile picture
hi_vis360
Posts: 5332 - Karma: 55,408
InspiredMediaI used a Arri M and the other filmer used a Arri SB.

I believe Kris Ostness, one of the creators of TBC always used a Bolex... but i might be wrong.

YO IBERG I got some light leaking in from the left side of the frame on my Arri S/B any idea what that is? Shooting on 100’ daylight rolls. I’m missing some lens port caps so I’m thinking that could be the issue, hoping it isn’t anything too serious

https://www.newschoolers.com/videos/watch/1109831/Arri-S---B-camera-test-mov

**This post was edited on Apr 26th 2025 at 12:10:57pm
2 months ago
0 0
profile picture
InspiredMedia
Posts: 527 - Karma: 41,596
i would suggest taping up those lens ports the best you can and also the gate. if that does not work... i am not sure
2 months ago
1 0
profile picture
hi_vis360
Posts: 5332 - Karma: 55,408
InspiredMediai would suggest taping up those lens ports the best you can and also the gate. if that does not work... i am not sure


wordd I'm def going to get some lens port caps, when you say the gate do you mean like overtop the pressure pad inside the camera or somewhere on the outside?
a month ago
0 0
All times are Eastern (-4); Currently it's 5:36PM