Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

FKS 140 Screws

profile picture
Hellalit
Posts: 130 - Karma: 440
Wsg NS, missing the 2 front screws on the toe piece of a fks 140. Research/friend has led me to the following info:


"FKS 14/140
8 QTY 18mm flat heads
4 QTY 10mm low heads
4 QTY 16mm low heads"


-meaning I am missing 2 of the 16 mm screws

this may sound slow, but There are many 16 mm phillips head screws, and im wondering how I would go about finding which 16mm screw will actually work for the toe piece.
-Would any 16mm work, or has to be very specific? js not trying to fuck this one up.

-For example: https://www.homedepot.com/p/Prime-Line-M4-0-7-x-16-mm-Grade-A2-70-Metric-Stainless-Steel-Phillips-Drive-Pan-Head-Machine-Screws-10-Pack-9131215/311229740?source=shoppingads&locale=en-US&srsltid=AfmBOoriF3IfjqqJ8Bt3FzcMhHe3BbZGTYR71Nz6Y2YBF-jk-h00KWmP4cM

**This thread was edited on Jan 23rd 2024 at 11:50:00am

**This thread was edited on Jan 23rd 2024 at 11:50:42am
Jan 23 2024 11:49AM
1 0
profile picture
OregonDead
Posts: 6949 - Karma: 25,117
I don't know a lot but my research suggests that the recommended screws for mounting alpine ski bindings may
have a unique thread pitch and thread count compared to screws found in hardware stores. Also they are #3 pozi and not phillips head screws. If it were me I'd check out a place like Tognar.com or another shop that specializes in supplying ski hardware and just ask them
Jan 23 2024 11:58AM
1 0
profile picture
Hellalit
Posts: 130 - Karma: 440
OregonDeadI don't know a lot but my research suggests that the recommended screws for mounting alpine ski bindings may
have a unique thread pitch and thread count compared to screws found in hardware stores. Also they are #3 pozi and not phillips head screws. If it were me I'd check out a place like Tognar.com or another shop that specializes in supplying ski hardware and just ask them


Pozi, Lowhead+16mm, has to be it?

https://www.tognar.com/binding-freedom-pozi-lowhead-m5-screws/

I appreciate your words big time homie 🙏
Jan 23 2024 12:05PM
0 0
profile picture
apc.fr
Posts: 293 - Karma: 879
Tognar is the spot but the more important question is if you're running inserts or not. Your link and above research is pointing to you to machine screws which only work if you're running inserts.

If not, you need specific screws that home depot and maybe even tognar won't carry. go to a reputable ski shop that does pivot mounts regularly or call tognar during their business hours and ask if they have any extra lying around.
Jan 24 2024 12:47AM
0 0
All times are Eastern (-5)