Din adjusment on armada N l10 bindings

Farmville42090% chance it’s fwp and not din

tutipups

so it would be that tiny screw on top?

GYRO_LTDNo bro it’s the big one one the front like every other binding shaped like that

Vish-shoeJust twist it and see if the indicator moves

tutipupsguess thats what ill do. also need to find where the thing for rear din is since im a moron

Vish-shoe

Should be the big screw right there

Vish-shoeThe biggest one, in line with the din indicator

BradFiAusNzCoCaThis thread is a mess 😂

But yes rear screw is usually FWP because you adjust the distance and get the heel nice and snug next to boot which gets nice and snug next to toe piece, as it doesn’t move.

tutipupsso then where is the rear din screw?

BradFiAusNzCoCaActually I looked too quickly. I believe those bindings you raise the rear tab under heel and push forward until the yellow is halfway in the indicator.

But honestly man, if you’re not 100% - probably shouldn’t do it yourself

tutipups

dont see how that would work. i mean worse thing that could happen tommorow is i ride at 7 din front and 6 rear anyways so might just wait and bring it into the shop

BradFiAusNzCoCaIt looks like Rossignol system where you jam screwdriver under the tab. I’m talking about fwp. Idk I’ve confused myself now. Take it into shop

mystery3I have a pair in a box I can check. (They're for kids/tween skis)

hegleezyarmada bindings????

mystery3https://www.google.com/amp/s/amp.issuu.com/salomonnz/docs/salomon_tm_alp_2021_72dpi/s/11188080

I'm still sort of confused as to where the indicator for proper forward pressure should line up. Sort of hard to find information on this binding tbh.

If you take it to a shop ask if the tech can show you what they're going to do.

JuviticusIn the plastic on both sides of the metal tab there are cutouts on the top. When boot is in, look through the channels from the side and the end of the metal tab should be between them

Just lift the metal tab with a flat head like the Rossi SPX which someone said

**This post was edited on Feb 27th 2023 at 10:29:36pm

mystery3https://www.google.com/amp/s/amp.issuu.com/salomonnz/docs/salomon_tm_alp_2021_72dpi/s/11188080

I'm still sort of confused as to where the indicator for proper forward pressure should line up. Sort of hard to find information on this binding tbh.

If you take it to a shop ask if the tech can show you what they're going to do.

tutipupsseems like its hard to find info on any binding that isnt an sth2 an attack or a pivot

tutipupsoh thanks

mystery3I guess it's folks like us that are doing how-to videos on youtube and shit? Those are your top three binding recommendations on NS for sure. A few people that like griffons and jesters as well.

JuviticusOh and yeah the flathead screws are for dins

Non_State_Actorhttps://www.google.com/amp/s/amp.issuu.com/salomonnz/docs/salomon_tm_alp_2021_72dpi/s/11188080

I'm still sort of confused as to where the indicator for proper forward pressure should line up. Sort of hard to find information on this binding tbh.

If you take it to a shop ask if the tech can show you what they're going to do.