Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Edges cracked and delaminating

profile picture
hegleezy
Posts: 187 - Karma: 1,820
Less than 10 days on my majesty vandals. My edges are cracked and delaminating on both skis. I have gotten caught on rails a few times already but that could just be me. I bought them from Sierra on sale so they aren’t on warranty. Feel free to throw any ideas on how to fix these, no matter how absurd.
yikes
Feb 21 2023 9:05PM
2 0
profile picture
piss.boy
Posts: 1491 - Karma: 10,618
neatly cut off the parts that are lifted up and fill the gap with epoxy
Feb 21 2023 9:11PM
2 0
profile picture
fnucklekuck
Posts: 11 - Karma: 68
Could try a soldering iron if you've got one and then just some pressure to get them to seat back in place.
Feb 21 2023 9:11PM
1 0
profile picture
Non_State_Actor
Posts: 4780 - Karma: 17,002
Clean up and let dry very well. Then knife in some warm g-flex into all the voids and clamp it tight with some 2x4 across both sides of the ski. You can use painters type to make sure you don't epoxy a wood block to your ski. Let cure fully. Then remove clamps, blocks, tape. Then scrape any base or sidewall material flush and file the edge down so it's nice and flush.

Are the edges detuned very much? I can't really tell from the photo.
Feb 21 2023 10:33PM
0 0
profile picture
SmokedGouda
Posts: 1032 - Karma: 5,765
Just get a hammer. Jeremy Clarkson says a hammer will fix everything
Feb 21 2023 10:41PM
4 0
profile picture
BradFiAusNzCoCa
Posts: 6942 - Karma: 60,650
I didn’t realize Sierra items on sale didn’t have warranty? You sure about that? Regardless impact damage may not be warrantable
Feb 21 2023 11:32PM
1 0
profile picture
sambuswell
Posts: 742 - Karma: 3,453
Detune before hitting rails if you didn't already
Feb 22 2023 7:43AM
0 0
All times are Eastern (-5)