Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Heat molding full tilts

profile picture
BnE-AR7-fks
Posts: 41 - Karma: 223
Any one know how to heat mold some of these jawns? The shin bang is starting to creep up on me here and I believe a mold would help out a lil
Feb 2 2023 2:06PM
1 0
profile picture
lluscho
Posts: 373 - Karma: 3,457
Go to your local shop they can do it for you probably for really cheap or free
Feb 2 2023 2:12PM
3 1
profile picture
Icant_kfed
Posts: 1279 - Karma: 11,591
Same way you do to any other boot, go see a shop or heat the oven to 200ish, leave them in for 10 or so and let them cool on your feet
Feb 2 2023 4:08PM
1 0
profile picture
CatdickBojangles
Posts: 6203 - Karma: 62,983
Heat a sock full of rice in the microwave for like 6-7 mins. Put it in the boot making sure it gets to the toe of the liner. Let it sit for 10-15 mins. Pull it out put your foot in with a block of 2x4 under the toe of the boot and keep pressure on the tongue. Make sure not to over tighten your boots leave them looser than normal. Do that for 15 mins and your golden.
Feb 2 2023 4:58PM
4 2
profile picture
BnE-AR7-fks
Posts: 41 - Karma: 223
CatdickBojanglesHeat a sock full of rice in the microwave for like 6-7 mins. Put it in the boot making sure it gets to the toe of the liner. Let it sit for 10-15 mins. Pull it out put your foot in with a block of 2x4 under the toe of the boot and keep pressure on the tongue. Make sure not to over tighten your boots leave them looser than normal. Do that for 15 mins and your golden.


Beautiful thanks boss man
Feb 2 2023 5:02PM
0 0
profile picture
CatdickBojangles
Posts: 6203 - Karma: 62,983
BnE-AR7-fksBeautiful thanks boss man


It’s also probably not going to help your shin bang by the way.
Feb 2 2023 6:33PM
6 0
profile picture
hegleezy
Posts: 187 - Karma: 1,829
Definitely neither, custom boot work isn’t cheap…
gorpfiendGo to your local shop they can do it for you probably for really cheap or free
Feb 2 2023 7:19PM
1 3
profile picture
PimpChimpin
Posts: 1287 - Karma: 12,573
Won’t help with shin bang unfortunately.
Feb 2 2023 7:34PM
3 0
profile picture
Newsheepers
Posts: 2163 - Karma: 4,183
would heat molding help with toe issues? specifically my nails are going into the other toes and making them bleed. they are tight
Mar 26 2023 9:23AM
0 0
profile picture
thankagaper
Posts: 911 - Karma: -1,548
Rice method for heat molding, you don't need to go overboard, your body heat locked in the boot will be molding them for life, you ever see the steam come out of your boots after a good sesh on a cold day?
Of your shins are hurting, their are racer pads for the tongue until it stops hurting...
Mar 26 2023 11:25PM
1 0
profile picture
KilaTsunami
Posts: 3185 - Karma: 30,229
Nothing, and nobody can make them comfortable.
Mar 27 2023 1:23PM
0 0
All times are Eastern (-5)