Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Remount with the same holes?

profile picture
DomRichard
Posts: 120 - Karma: 707
This is a pretty stupid question but I just wanna be sure. Can i just take my pivot toe bindings off and put other ones on without worrying or should I epoxy the new ones in or sumn? Not tryna rip the bindings out.
Apr 26 2022 7:50AM
4 0
profile picture
Icant_kfed
Posts: 1274 - Karma: 11,538
Take it to a shop, they should put inserts in the holes and redrill them, if the hole is not stripped you should be able to epoxy them back in but plugging them would be a safer option
Apr 26 2022 8:00AM
2 0
profile picture
BradFiAusNzCoCa
Posts: 6958 - Karma: 60,777
So you’re saying you have new pivots and want to put them on your skis? In theory, yes. You should be able to unscrew the old toe and glue and screw the new toe. But there are many variables like condition of the holes, is the binding the same binding, etc.
Apr 26 2022 9:23AM
7 0
profile picture
DomRichard
Posts: 120 - Karma: 707
Yeah they are older white pivot 14s and the holes are one season old, the current binding toes are ‘22 pivots. I assume they have the same hole pattern.
BradFiAusNzCoCaSo you’re saying you have new pivots and want to put them on your skis? In theory, yes. You should be able to unscrew the old toe and glue and screw the new toe. But there are many variables like condition of the holes, is the binding the same binding, etc.
Apr 26 2022 10:25AM
0 0
profile picture
skiP.E.I.
Posts: 7816 - Karma: 21,827
They should have the same hole pattern. I've remounted bindings in the same holes, using epoxy with no issues
Apr 26 2022 10:56AM
6 0
profile picture
DomRichard
Posts: 120 - Karma: 707
also is running old pivot 14s with new pivot 12s an issue, i wanna have black and white toes but i’m not sure if that’s a great idea
Apr 26 2022 10:59AM
2 1
profile picture
Koshermilk
Posts: 501 - Karma: 1,893
Epoxy with cut up fiberglass cloth has worked very well in my experience
Apr 26 2022 11:19AM
1 0
profile picture
tdollo
Posts: 3770 - Karma: 18,500
As long as you screw them in by hand you should be good. Make sure not to strip the holes and throw some wood glue in there to waterproof it. Worst case you can helicoil it
Apr 26 2022 6:16PM
4 0
profile picture
Paul.
Posts: 1596 - Karma: 11,047
You can definitely reuse holes just gotta be careful you dont strip the threads when putting the screws back in. Fill the hole with waterproof wood glue first, then slowly twist the screw down into the hole until it stops. Check for gaps underneath the toe to be sure you are all the way at the bottom, and be careful you dont go beyond the bottom or you'll get a spinner and need to helicoil. Some people suggest turning the screw backwards first to feel for where the threads start, but thats never really worked for me, might be worth trying tho
Apr 26 2022 11:11PM
3 0
profile picture
anders_a
Posts: 1680 - Karma: 5,603
resuse with regular woodglue will be fine 95% of the time. kinda depends on ski as well, soft lightweight noodle or proper ski


use a manual screwdriver and make sure they go down same threads without rethreading, your good.



if they feel like shit, the epoxy, dust, steel wool.. or just inserts is the ticket.

**This post was edited on Apr 27th 2022 at 8:15:37am
Apr 27 2022 8:14AM
0 0
profile picture
skiP.E.I.
Posts: 7816 - Karma: 21,827
DomRichardalso is running old pivot 14s with new pivot 12s an issue, i wanna have black and white toes but i’m not sure if that’s a great idea

This is not a good idea
Apr 27 2022 8:17AM
1 0
profile picture
DomRichard
Posts: 120 - Karma: 707
okay thank you, not super informed on binding do’s and dont’s so this is helpful
skiP.E.I.This is not a good idea
Apr 27 2022 12:09PM
0 0
All times are Eastern (-5)