Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

How to change Pivot 18 base?

profile picture
matthew_luketich
Posts: 10 - Karma: 72


Does anyone know how to take apart the toe piece of a pivot 18 or how to change the bases? I’m trying to change the base because I bought it (used) with the touring base by accident (touring base is basically the same just made of metal) and I wanted to change the base to the standard plastic base to make them a little lighter. Basically trying to switch the base on the white pivot to a base like what’s on the sliver pivot. Any help is appreciated!
Apr 16 2022 9:39PM
7 0
profile picture
Phatboy64
Posts: 118 - Karma: 456
It is super easy. Follow the video in the link I attached. BTW if you don’t want the “touring plates” feel free to send them to me, I will put them to good use 👍

https://casttouring.com/pages/how-the-freetour-works#toepedestalupgrade
Apr 16 2022 11:40PM
9 0
profile picture
Paul.
Posts: 1598 - Karma: 11,081
Unscrew the din screw (big one in the front) all the way off, wiggle the main housing loose and tilt it forward, pull the big metal pin out the back of the main housing. Make sure you note the location and proper orientation of all the washers/spacers while taking it apart so you put it back together correctly.

Here's a video tutorial

https://www.newschoolers.com/videos/watch/1040096/Cast-Alpine-Toe-Conversion-Upgrade
Apr 17 2022 12:13AM
3 0
profile picture
jaxful
Posts: 94 - Karma: 718
Just so you know, the touring base from the cast system isn’t the same as the normal base when it comes to mounting. It requires a mounting plate from cast touring.
Apr 17 2022 12:18AM
2 0
profile picture
weastcoat
Posts: 6419 - Karma: 74,047
Guarantee you mfs see this post and hit you up to ask if they can buy the white pivots 😭
Apr 17 2022 2:21AM
10 1
profile picture
TRVP_ANGEL
Posts: 12506 - Karma: 116,121
jaxfulJust so you know, the touring base from the cast system isn’t the same as the normal base when it comes to mounting. It requires a mounting plate from cast touring.

He aint using cast tho 🤔
Apr 17 2022 2:50AM
0 1
profile picture
jaxful
Posts: 94 - Karma: 718
TRVP_ANGELHe aint using cast tho 🤔


The base on the white toe piece is from a cast system
Apr 17 2022 3:18AM
0 0
profile picture
skierman
Posts: 8333 - Karma: 7,765
So..... much........ dumb........ can't......... take.......... it...........
Apr 17 2022 5:59AM
12 3
profile picture
matthew_luketich
Posts: 10 - Karma: 72
thanks homie this vid actually helped!
Paul.Unscrew the din screw (big one in the front) all the way off, wiggle the main housing loose and tilt it forward, pull the big metal pin out the back of the main housing. Make sure you note the location and proper orientation of all the washers/spacers while taking it apart so you put it back together correctly.

Here's a video tutorial

https://www.newschoolers.com/videos/watch/1040096/Cast-Alpine-Toe-Conversion-Upgrade
Apr 17 2022 11:04AM
1 0
profile picture
.nasty
Posts: 10581 - Karma: 11,150
jaxfulJust so you know, the touring base from the cast system isn’t the same as the normal base when it comes to mounting. It requires a mounting plate from cast touring.


deleted comment.

**This post was edited on Apr 17th 2022 at 12:25:00pm
Apr 17 2022 12:24PM
2 0
profile picture
tdollo
Posts: 3770 - Karma: 18,528
undo the screw at the front and she'll come apart. There's 3 main pieces to the toes; the base plate, the metal shell and the spring. If you aren't completely incompetent you'll be able to figure it out
Apr 17 2022 12:40PM
3 0
All times are Eastern (-5)