Nendaz Backcountry Invitational

Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Help with tube rails

profile picture
Westsideskier47
Posts: 4 - Karma: 101
Tips on tube rails? I can do flat rails but not tube rails. For some reason they scare me more than flat ones
Feb 1 2022 12:07PM
5 0
profile picture
Gourd
Posts: 468 - Karma: 5,050
Just send it. Look at the end of the rail. Go as fast as you’re comfortable with. Keep practicing and you’ll get it no worries
Feb 1 2022 1:12PM
6 0
profile picture
ReturnToMonkey
Posts: 6425 - Karma: 69,827
Find one you like and hike it a bunch until you can do a few different tricks consistently on it. They'll be easier and way more fun afterwards
Feb 1 2022 9:28PM
4 0
profile picture
abcdefu
Posts: 182 - Karma: 812
You will need determination. You will need perseverance. You will need dedication. You will need regiment. You will shed blood, sweat, and tears.This is a tube rail we are talking about; it is not for the faint of heart.
Feb 2 2022 11:18AM
12 0
profile picture
ajbski
Posts: 1312 - Karma: 5,389
if the park isnt busy, find a low one and just go stand on it. find your balance on it with out the risk of sliding out.

hit it slow, who cares if you straddle.

then build up the speed.

tubes can change from day to day. one day theyll slide nice, the next it can feel sticky. keep that in mind
Feb 2 2022 5:02PM
3 0
profile picture
Timby
Posts: 182 - Karma: 1,421
Gonna second the homie erik, do you have to scissor while on the tube in order to stay on?
Feb 3 2022 11:12PM
2 0
profile picture
Westsideskier47
Posts: 4 - Karma: 101
TimbyGonna second the homie erik, do you have to scissor while on the tube in order to stay on?


I’m not sure I’ve never hit a tube before. I can hit flat bars pretty consistent but I’ve tried just jumping over the side of the tube and it just feels weird the way it slides. Also the only tube there right now is a small tube that drops down to another tube which is scary to me. Also I’m scared since every time I fail a rail I bail and always end up with the rail in between my legs.
Feb 4 2022 11:14AM
2 0
profile picture
ajbski
Posts: 1312 - Karma: 5,389
Erik0824end up with the rail in between my legs.

thats straddling. just go slow, keep the risk low. finding the right feature to learn on is half the battle. i recomend start learning by taking off with the rail inbetween your feet, you need to do less foot work that way.
Feb 4 2022 11:24AM
2 0
profile picture
Timby
Posts: 182 - Karma: 1,421
Erik0824I’m not sure I’ve never hit a tube before. I can hit flat bars pretty consistent but I’ve tried just jumping over the side of the tube and it just feels weird the way it slides. Also the only tube there right now is a small tube that drops down to another tube which is scary to me. Also I’m scared since every time I fail a rail I bail and always end up with the rail in between my legs.


Sorry I should've clarified, I was expanding upon your question by asking another one, I need some help with tube rails too.
Feb 4 2022 11:29AM
2 0
profile picture
abcdefu
Posts: 182 - Karma: 812
TimbyGonna second the homie erik, do you have to scissor while on the tube in order to stay on?


no, you don't. and you don't really have to think about scissoring when you start to do spins off it'll just happen naturally.

but no, scissoring is not something you need to think about. just focus on the end of the rail and keeping your skis flat on it just like a flat bar. there's really no difference in approach; so if you have flat bars down, just look at a tube the same way. Im not exactly sure, but I don't think tubes are any more difficult than flat bars, and they make doing swaps (esp surface swaps) easier imo

**This post was edited on Feb 4th 2022 at 11:49:08am
Feb 4 2022 11:46AM
4 0
profile picture
Westsideskier47
Posts: 4 - Karma: 101
TimbySorry I should've clarified, I was expanding upon your question by asking another one, I need some help with tube rails too.


I ended up doing it, you do not have to scissor to stay on, it feels like a normal flag rail
Feb 5 2022 1:29PM
0 0
profile picture
casual
Posts: 6712 - Karma: 6,751
Not really, no. They really don’t slide much different than a regular rail when talking just a natty slide.

If you slide rails and boxes comfortably, just send it, don’t overthink it.

Tubes are so fun imo.


TimbyGonna second the homie erik, do you have to scissor while on the tube in order to stay on?
Feb 5 2022 2:22PM
3 0
profile picture
Chrischi69
Posts: 652 - Karma: 5,063
Same basic idea just work on it mentally
Feb 5 2022 3:56PM
1 0
All times are Eastern (-5)