Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
evanballpersonally ive found that the stiffer the tongue, the more painful the shinbang. the best way to minimize shinbang imo is make sure the tongue of the boot/ part of the boot that contacts your shin has an even distribution of pressure across the shin. so if for example the top buckle is already cranked and the middle one isnt quite as tight, putting the strap under the tongue will probably make the problem worse not better, and what you should really do is find a way to get buckle #2 tighter.
BigPurpleSkiSuitAlright dude, here's the deal for me. I don't know anything about your height/weight/whatever, but the biggest cause of non backseat skiing shin bang is that your ski boot does not fit your lower leg/instep. Ski boots as a whole are often made with the idea of trying to fit as many people as possible. Most people who want to enjoy skiing are wealthy tourists. Wealthy tourists are usually not the most skinny of people. Obviously when you go to try on boots, or shoes, or really anything it won't fit just right. My personal issue was that most boots are not very skinny/narrower through the lower leg, and I have a tall shinbone where my calf muscle sits mostly above the boot with a skinnier lower leg. I used to get terrible shin bang because everyone said your shin should be pressed into the front of your boot and didn't tell me anything about how I should be making the liner consistently be touching my shinbone/lower leg. You have to protect your shinbone from the trauma of slamming into the front of your boot. In addition, most liners will pack out more quickly when used by your average Newschooler because they put more force through their boot than your average tourist. For me, that meant buying a low volume boot like the Smax 130 from Salomon, putting a foam eliminator pad in it and using a booster strap to be able to tighten the whole operation. I also pad my lower shin/instep with a beer cozie as well. This puts the liner right up against my shin, while padding it effectively. Here are some pictures showing what I mean. Not everything I've done would necessarily work for you, but this same concept does work in terms of protecting against shin bang. Unless you're skiing in the backseat, then you're putting to much strain on your dorsiflexor muscles which is the cause of your pain. Also, the reality is once shin bang sets in, you need to give it some time to rest, preferably a week or more if you can.
**This post was edited on Jan 31st 2022 at 8:37:00pm
2manyVitaminsThanks for the in depth reply that helps a lot. I do think my shinbang is from backseat skiing/improper boot tightening as I’ve been putting effort to fix my ski position but still slip up sometimes, I do feel the boot fits pretty good and I’m going to play around with the buckles and see if something different works, if I can’t sort it out this season I’m going to go try on every boot in the store and find a perfect fit, even if not fts
edit: I’m about 5’9 160 and I think a big part is that I literally haven’t taken more than 3 days off since it set in which never let it fully heal
**This post was edited on Jan 31st 2022 at 8:49:04pm
BigPurpleSkiSuitthat'll do it too. Is the pain more on your shinbone, or more on the sides of your shin running down the leg?
BigPurpleSkiSuitAlright dude, here's the deal for me. I don't know anything about your height/weight/whatever, but the biggest cause of non backseat skiing shin bang is that your ski boot does not fit your lower leg/instep. Ski boots as a whole are often made with the idea of trying to fit as many people as possible. Most people who want to enjoy skiing are wealthy tourists. Wealthy tourists are usually not the most skinny of people. Obviously when you go to try on boots, or shoes, or really anything it won't fit just right. My personal issue was that most boots are not very skinny/narrower through the lower leg, and I have a tall shinbone where my calf muscle sits mostly above the boot with a skinnier lower leg. I used to get terrible shin bang because everyone said your shin should be pressed into the front of your boot and didn't tell me anything about how I should be making the liner consistently be touching my shinbone/lower leg. You have to protect your shinbone from the trauma of slamming into the front of your boot. In addition, most liners will pack out more quickly when used by your average Newschooler because they put more force through their boot than your average tourist. For me, that meant buying a low volume boot like the Smax 130 from Salomon, putting a foam eliminator pad in it and using a booster strap to be able to tighten the whole operation. I also pad my lower shin/instep with a beer cozie as well. This puts the liner right up against my shin, while padding it effectively. Here are some pictures showing what I mean. Not everything I've done would necessarily work for you, but this same concept does work in terms of protecting against shin bang. Unless you're skiing in the backseat, then you're putting to much strain on your dorsiflexor muscles which is the cause of your pain. Also, the reality is once shin bang sets in, you need to give it some time to rest, preferably a week or more if you can.
**This post was edited on Jan 31st 2022 at 8:37:00pm
700billionits not really about flex its about how well the boots fit and how snug they are. you'll get shining from having to much room in the boot. Id recommend going to a good boot fitter is your best start. also, full tilts may honestly be the cause of your shin bang. they wear out super quickly because of their flex pattern