Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

What epoxy to fix delamination?

profile picture
Skibumsmith
Posts: 5432 - Karma: 11,823
I know I could go to the hardware store and get any 2 part clear epoxy but I was wondering if ski techs out there had a product that they preferred - something that wasn’t brittle when cured etc.
Cheers
Jan 7 2022 2:26PM
4 0
profile picture
ReturnToMonkey
Posts: 6416 - Karma: 69,669
G-Flex
Jan 7 2022 2:28PM
6 0
profile picture
Casey
Posts: 7871 - Karma: 24,631
From what I understand the longer the cure time the more flexible it will be when dry. So avoid fast cure. I just used regular marine epoxy from Home Depot to seal a gash in my top sheet/sidewall. But that is a little different probably worth getting some expert opinions first.
Jan 7 2022 2:32PM
3 0
profile picture
ajbski
Posts: 1309 - Karma: 5,351
ive never had much luck from any epoxy. they will open up again eventually.

adhesive + rivets or old fashined screw, nuts and washers work best in that scenario imo
Jan 7 2022 3:22PM
1 1
profile picture
ReturnToMonkey
Posts: 6416 - Karma: 69,669
ajbskiive never had much luck from any epoxy. they will open up again eventually.

adhesive + rivets or old fashined screw, nuts and washers work best in that scenario imo


Thats the thing with ski repair. If you keep using them, you'll have to heavily increase your maintainence. If you are fine with that, you can make skis last forever.
Jan 7 2022 3:23PM
2 0
profile picture
jompcock
Posts: 1538 - Karma: 11,476
Spiked t nuts like is used in some ski boot hardware is your friend. Use alongside epoxy to keep water out and prevent bolt from unthreading.
Jan 7 2022 3:25PM
1 0
profile picture
ajbski
Posts: 1309 - Karma: 5,351
ReturnToMonkeyThats the thing with ski repair. If you keep using them, you'll have to heavily increase your maintainence. If you are fine with that, you can make skis last forever.


as long as its delam anyways...

i dont think you can replace signifacnt amounts of edges or cores for that matter
Jan 7 2022 3:29PM
2 0
profile picture
abar.
Posts: 1062 - Karma: 6,889
Jan 7 2022 4:38PM
7 0
profile picture
Neives_tiddies
Posts: 142 - Karma: 965
I used e600 marine glue and clamped for a couple days on my byard skis and that worked fine
Jan 7 2022 5:21PM
1 0
profile picture
TOAST.
Posts: 7506 - Karma: 36,370
Gflex for sure (im not a ski tech just lots of rail damage)
Jan 7 2022 5:32PM
1 0
profile picture
Chrischi69
Posts: 652 - Karma: 5,062
West systems G-flex just go to any marine store. also probably need some clamps
Jan 7 2022 7:15PM
2 0
All times are Eastern (-5)