Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

I need some help with my backyard setup!

profile picture
hmashred
Posts: 5 - Karma: 64



Hey guys! I built a backyard setup but unfortunately it didn’t turn out as good as I wanted. Something’s off and I’m not sure what. I feel like at the beginning there is much speed but before the kicker it kinda stops. Also it feels like everything is happening super guickly and it’s really hard to focus and prepare before the kicker. I think that the problem might lie in the wrong angle and that there is almost no flat part before the kicker. Might this be true or if not does anyone know what to do? And can anybody think of a easier way to fix this than to take almost everything apart? Otherwise it would be a huge fix and I’m trying to find a way that wouldn’t take so much time.
Jun 11 2021 2:17PM
6 0
profile picture
keagan.karstens
Posts: 1600 - Karma: 34,800
The transition from going down hill to uphill is way too quick. I suggest basically cutting it in half and adding a hood 3-5 feet of transition between the two sections.
Jun 11 2021 2:38PM
14 0
profile picture
ScaryDumpTruck
Posts: 584 - Karma: 3,392
Looks like you are using 2 different materials. The speed could change when you go from one to the other. And that’s kind of how summer setups are, you don’t get much setup time but youll get used to it
Jun 11 2021 2:40PM
9 0
profile picture
percs
Posts: 2280 - Karma: 5,793
The lip is too steep just cut off the last 6-12 inches of takeoff and youll be good. You not need a rainbow-esque kicker like that to get on to rails
Jun 11 2021 5:30PM
4 0
profile picture
twinkle_toes
Posts: 812 - Karma: 9,665
keagan.karstensThe transition from going down hill to uphill is way too quick. I suggest basically cutting it in half and adding a hood 3-5 feet of transition between the two sections.


What about making the platform shorter?
Jun 11 2021 10:18PM
2 0
profile picture
sullivano*b
Posts: 1233 - Karma: 8,127
my summer setup which isn’t done but should work has a few feet of flat which worked quite well time wise in the winter but it’s also quite a bit different because i have a natural slope/hill + drop in so it’s probably 30 feet long including the rail. PM me i’ll send you some pictures later when i get out of bed
Jun 12 2021 7:28AM
2 0
profile picture
mrk127
Posts: 1804 - Karma: 16,331
Yea you could lessen the steepness of the lip or you could put a ski length flat bottom before the lip. You would lose more speed with the flat bottom but maybe you want less speed and more setup time
Jun 13 2021 12:31PM
2 0
profile picture
hmashred
Posts: 5 - Karma: 64
mrk127Yea you could lessen the steepness of the lip or you could put a ski length flat bottom before the lip. You would lose more speed with the flat bottom but maybe you want less speed and more setup time


yes, that’s why i’m thinking of making the drop in more steep and then adding the flat part, because i think that when i’d just add the flat part and leave the drop in the same, then i’d run out of speed.
Jun 14 2021 1:43AM
0 0
profile picture
mrk127
Posts: 1804 - Karma: 16,331
hmashredyes, that’s why i’m thinking of making the drop in more steep and then adding the flat part, because i think that when i’d just add the flat part and leave the drop in the same, then i’d run out of speed.


Do you have another 4ft of turf material? the flat bottom would probably solve the problem
Jun 14 2021 2:11AM
2 0
profile picture
hmashred
Posts: 5 - Karma: 64
mrk127Do you have another 4ft of turf material? the flat bottom would probably solve the problem


yep, i have some material left over
Jun 14 2021 3:10AM
0 0
profile picture
weastcoat
Posts: 6435 - Karma: 74,259
Honestly it would make a huge difference if you made the drop in a few feet taller. Then you could make the inrun steeper and try to make the lip not as steep. Flatter lips suck
Jun 14 2021 9:36AM
0 0
All times are Eastern (-5)