Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Need help with binding problem

profile picture
SirNigel
Posts: 46 - Karma: 130
I need to move my bindings just a bit to make my boots fit. I’ve maxed out the screws on the back and need just a little bit more space (as seen) I really want to avoid having to remount them but if I have to I will. Any ideas on how I could make some space?
Dec 7 2020 7:48PM
2 0
profile picture
PsychedelicMoose
Posts: 792 - Karma: 3,568
file the heel out
Dec 7 2020 7:59PM
2 3
profile picture
SirNigel
Posts: 46 - Karma: 130
PsychedelicMoosefile the heel out


I thought about it but wanted to avoid it. Thanks tho
Dec 7 2020 8:06PM
1 0
profile picture
PsychedelicMoose
Posts: 792 - Karma: 3,568
EndoCrocI thought about it but wanted to avoid it. Thanks tho


Probably best not to it might fuck up your riding. I'm not sure if there are pivot heelpieces that have longer length but maybe an fks heelpiece could work, they have same mounting pattern. The picture looks like if you stomped hard it would clip in but you probably tried it already.
Dec 7 2020 8:23PM
2 0
profile picture
KCoCM
Posts: 963 - Karma: 8,782
PsychedelicMooseProbably best not to it might fuck up your riding. I'm not sure if there are pivot heelpieces that have longer length but maybe an fks heelpiece could work, they have same mounting pattern. The picture looks like if you stomped hard it would clip in but you probably tried it already.


From the picture I thought the same thing. OP did u try putting ur body weight on the heelpiece and also use ur hand to reach back and pull up on the dildo

Edit: I suggest this cuz it happened to me with one of my pairs of skis when I changed boots that the only way for me to click in was manually pulling with my hand to click in

**This post was edited on Dec 7th 2020 at 9:17:03pm
Dec 7 2020 9:15PM
1 2
profile picture
SirNigel
Posts: 46 - Karma: 130
KCoCMFrom the picture I thought the same thing. OP did u try putting ur body weight on the heelpiece and also use ur hand to reach back and pull up on the dildo

Edit: I suggest this cuz it happened to me with one of my pairs of skis when I changed boots that the only way for me to click in was manually pulling with my hand to click in

**This post was edited on Dec 7th 2020 at 9:17:03pm


Yeah I can do that. You were able to ski that way no problem?
Dec 7 2020 9:22PM
0 0
profile picture
SirNigel
Posts: 46 - Karma: 130
PsychedelicMooseProbably best not to it might fuck up your riding. I'm not sure if there are pivot heelpieces that have longer length but maybe an fks heelpiece could work, they have same mounting pattern. The picture looks like if you stomped hard it would clip in but you probably tried it already.


Yeah I really tried to put weight on it and couldn’t get it down. I’m tempted to file but I’d probably regret it in the end.
Dec 7 2020 9:24PM
1 0
profile picture
KCoCM
Posts: 963 - Karma: 8,782
EndoCrocYeah I can do that. You were able to ski that way no problem?


I never had any issues, but sometimes I could feel when the boot wasnt in there perfectly so I just clicked out and did it again making sure to stomp harder to get the boot fully in there. It was also with some marker griffons, not pivot 12's, but If doing that clicks ur boot in why not give it a shot on snow
Dec 7 2020 9:27PM
1 2
profile picture
animator
Posts: 4552 - Karma: 26,249
EndoCrocYeah I really tried to put weight on it and couldn’t get it down. I’m tempted to file but I’d probably regret it in the end.


don't file them down because in the future that boot will instantly fail a release test and no shop will touch them. DIY and ski gear (boots, bindings) don't mix super well. If your heel piece is maxed, you need a remount. if you find yourself having to bend down and manually lift it up, there's way too much forward pressure and once you're in you won't come out. do yourself a favor, and remount if you know how, and take them to a shop if you don't!
Dec 7 2020 9:32PM
10 0
profile picture
KCoCM
Posts: 963 - Karma: 8,782
id listen to animator, I wouldnt want u to get hurt cuz of a suggestion i made lol
Dec 8 2020 12:07AM
6 0
profile picture
anders_a
Posts: 1680 - Karma: 5,602
you can get 1-2mm with a binding freeom insert, and up to 10-11mm with a quiver killer rescue set, maybe a few mm more with a helicoil, you would need a drillpress/centering tool to drill off center holes and its a bit of a PITA but doable. might make a guide as Im doing just that on a pair of skis now shortly
Dec 8 2020 9:14AM
3 0
profile picture
anders_a
Posts: 1680 - Karma: 5,602
you can get 1-2mm with a binding freeom insert, and up to 10-11mm with a quiver killer rescue set, maybe a few mm more with a helicoil, you would need a drillpress/centering tool to drill off center holes and its a bit of a PITA but doable. might make a guide as Im doing just that on a pair of skis now shortly
Dec 8 2020 9:15AM
1 0
profile picture
SirNigel
Posts: 46 - Karma: 130
anders_ayou can get 1-2mm with a binding freeom insert, and up to 10-11mm with a quiver killer rescue set, maybe a few mm more with a helicoil, you would need a drillpress/centering tool to drill off center holes and its a bit of a PITA but doable. might make a guide as Im doing just that on a pair of skis now shortly


Yeah I’m not sure what I’m going to do. Thanks for the info tho
Dec 8 2020 11:45AM
0 0
All times are Eastern (-5)