Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Anyone with experience mounting bindings

profile picture
KCoCM
Posts: 963 - Karma: 8,787
I picked up my skis from the shop last night and I noticed that there was a slight gap between the right toe piece and the ski at the shop, maybe less than 1/2 mm, so I asked the guy if it was an issue and he said no. I dont know anything about actually mounting bindings so I just shrugged my shoulders and took his word for it. Since bringing my skis home I clicked into the bindings with my boots on, and now that I look at the right toe piece again, the space that I saw is gone, but the toe piece now slightly wiggles.

Is this something I should take them back to the shop about? My intuition tells me clearly yes, I should take them back, but I just wanted some other opinions. The guys at this shop are a bunch of old dudes that have the do no wrong attitude so I wanted opinions before having to deal with them again.

EDIT: Pivot 14s

EDIT 2x: there seems to be no wiggle with my boot actually clicked into the binding

**This thread was edited on Dec 4th 2020 at 10:43:07am

**This thread was edited on Dec 4th 2020 at 10:50:44am

**This thread was edited on Dec 4th 2020 at 10:59:14am
Dec 4 2020 10:42AM
2 0
profile picture
vermartian
Posts: 10 - Karma: 53
I worked in a shop for a couple years. I would just try and snug up the toe piece with a screwdriver until you clearly feel you’ve reached an end point at each of the screws. Use firm downward pressure and spin slowly. Just make sure to stop if you notice a screw just keeps spinning, so you don’t strip it.
Dec 4 2020 11:26AM
2 0
profile picture
anders_a
Posts: 1680 - Karma: 5,603
pics/video?



It can happen from vulcanoing topsheet and not tapping the thread/deburring hole. I overcome this by mora ugga dugggas at times



probably fixable until glue dries by just tightening it more, if not undoing, maybe some sawdust into the clue than redoing.



Either way fixable, but yeah ruins the feeling of somthing new :|
Dec 4 2020 1:06PM
0 0
profile picture
KCoCM
Posts: 963 - Karma: 8,787
anders_apics/video?



It can happen from vulcanoing topsheet and not tapping the thread/deburring hole. I overcome this by mora ugga dugggas at times



probably fixable until glue dries by just tightening it more, if not undoing, maybe some sawdust into the clue than redoing.



Either way fixable, but yeah ruins the feeling of somthing new :|


https://www.newschoolers.com/videos/watch

https://www.newschoolers.com/videos/watch/983316/IMG-1957-MOV

**This post was edited on Dec 4th 2020 at 1:16:21pm
Dec 4 2020 1:13PM
0 0
profile picture
drifts
Posts: 620 - Karma: 4,475
Just take it to the shop and show them the wiggle and ask nicely if they could make the wiggle go away. If the shop messes it up tightening the screws they'll help you out, if you strip the screw tightening it up you are screwed.
Dec 4 2020 1:17PM
4 0
profile picture
skidemon22
Posts: 4454 - Karma: 2,023
Yeah, take it back, show it to them and have them set it right. that much play could lead to ripping a toe piece out...
Dec 4 2020 1:31PM
2 0
profile picture
anders_a
Posts: 1680 - Karma: 5,603
yeah, take back to the shop.



revolt 104s?

**This post was edited on Dec 4th 2020 at 1:48:50pm
Dec 4 2020 1:42PM
0 0
profile picture
KCoCM
Posts: 963 - Karma: 8,787
anders_ayeah, take back to the shop.



revolt 104s?


yea finally got a good pair from volkl, i made that thread about them if u remember
Dec 4 2020 1:47PM
0 0
profile picture
anders_a
Posts: 1680 - Karma: 5,603
KCoCMyea finally got a good pair from volkl, i made that thread about them if u remember


Sweeet! but you really cant catch a break can you?

The cores can take a lot of ugga duggas, and they are not fooked. , I put my powertool on max torque setting when mounting. :D


the reason there is no wiggle with your boots in, is the preload from the dildo in the back
Dec 4 2020 1:49PM
0 0
profile picture
KCoCM
Posts: 963 - Karma: 8,787
anders_aSweeet! but you really cant catch a break can you?

The cores can take a lot of ugga duggas, and they are not fooked. , I put my powertool on max torque setting when mounting. :D


the reason there is no wiggle with your boots in, is the preload from the dildo in the back


seems like I absolutely cannot catch a break lol. Idgaf tho really... its all happened before my first trip to a hill and i have loads of free time and like to generally think that people dont make mistakes like the ones ive been experiencing on purpose/ turn a blind eye to them cuz of laziness. could be wrong tho.
Dec 4 2020 1:54PM
0 0
profile picture
anders_a
Posts: 1680 - Karma: 5,603
KCoCMseems like I absolutely cannot catch a break lol. Idgaf tho really... its all happened before my first trip to a hill and i have loads of free time and like to generally think that people dont make mistakes like the ones ive been experiencing on purpose/ turn a blind eye to them cuz of laziness. could be wrong tho.


I manage quite a few people at work, and I'm beginning to loose faith in mankind.
Dec 4 2020 2:10PM
0 0
All times are Eastern (-5)