Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Did I just f*** up my Atomic 120 Bentchetlers?

profile picture
alpha.moose
Posts: 138 - Karma: 1,006
I ride the 192 cm Atomic Bentch Chetlers and am 6'3" at ~175 lbs. My local shop guy talked me into putting quiver killer inserts into my 120's so I did not have to get another shift for my 100's. Unfortunately, they used a Helicoil the first time the shifts were mounted and so they had to move to + or - 1cm. I saw that Tim Durtschi had posted that he rode his skis at -1.5 from the center so I figured that -2cm would be fine. But I just realized that Tim was talking about -1.5 inches, not cm, so his skis are almost exactly -4cm from center where I could have had my shifts mounted. Now I am just kicking myself and wondering how much difference I will notice this season going from -3cm to -2cm. Feel free to call me out if I am just being neurotic, I just really love this skis.
Oct 7 2020 8:36AM
5 0
profile picture
.nasty
Posts: 10588 - Karma: 11,253
Do you know for sure that Tim said inches and not cm? I don't know many who use inches when talking about skis. If he did say inches he'd be about the only one I know who'd ski that ski that far back from center. -2cm to -3cm is what most people seem to mount them at, and I personally like the ski at -2.5cm. Obviously I'm not Tim and don't ski close to that well, but I really wouldn't worry about it and just run it to see if you like it.

In other news, hopefully the shop that made an error compensated you somehow on that miss drill/helicoil.
Oct 7 2020 9:44AM
13 0
profile picture
animator
Posts: 4558 - Karma: 26,307
Bent Chet 100s have a pretty big sweet spot so -2 and -4 won’t make a huge difference
Oct 7 2020 10:46AM
4 0
profile picture
.nasty
Posts: 10588 - Karma: 11,253
animatorBent Chet 100s have a pretty big sweet spot so -2 and -4 won’t make a huge difference


I believe he is referring to his 120's
Oct 7 2020 11:01AM
1 0
profile picture
animator
Posts: 4558 - Karma: 26,307
.nastyI believe he is referring to his 120's


Oh sorry. Same thing goes for the 120 in my opinion the sweet spot is even bigger
Oct 7 2020 12:18PM
3 0
profile picture
alpha.moose
Posts: 138 - Karma: 1,006
.nastyDo you know for sure that Tim said inches and not cm? I don't know many who use inches when talking about skis. If he did say inches he'd be about the only one I know who'd ski that ski that far back from center. -2cm to -3cm is what most people seem to mount them at, and I personally like the ski at -2.5cm. Obviously I'm not Tim and don't ski close to that well, but I really wouldn't worry about it and just run it to see if you like it.

In other news, hopefully the shop that made an error compensated you somehow on that miss drill/helicoil.

I had the same thought with inches vs. cm. I have never heard anyone talk about them in terms of inches. I attached the post that I assume is from Tim and it definitely says inches. Thanks for the feedback on the -2cm. I think it will be fine it is just a little anxiety-inducing since I invested a lot in this set-up.

Also, I went and talked to the shop after your post and they gave me 50$ back for the binding. Not much, but better than nothing. Thanks for the help!
Oct 7 2020 1:54PM
1 0
profile picture
alpha.moose
Posts: 138 - Karma: 1,006
animatorOh sorry. Same thing goes for the 120 in my opinion the sweet spot is even bigger

Thanks that was the reassurance my neuroticism definitely needed!
Oct 7 2020 1:55PM
1 0
profile picture
anders_a
Posts: 1680 - Karma: 5,603
Chillax dude, my shifts are at -2 on my BC120s.

I know the feeling though.. its not a good one.
Oct 7 2020 4:42PM
4 0
profile picture
Swandog7
Posts: 4956 - Karma: 9,025
i mounted mine at -2.5cm back and they rip. I've never ridden them at recommended but I haven't felt the need to wonder what it's like
Oct 8 2020 6:27PM
0 0
profile picture
.nasty
Posts: 10588 - Karma: 11,253
alpha.mooseI had the same thought with inches vs. cm. I have never heard anyone talk about them in terms of inches. I attached the post that I assume is from Tim and it definitely says inches. Thanks for the feedback on the -2cm. I think it will be fine it is just a little anxiety-inducing since I invested a lot in this set-up.

Also, I went and talked to the shop after your post and they gave me 50$ back for the binding. Not much, but better than nothing. Thanks for the help!


funny! I still have this feeling like he just said inches by accident. haha who knows!
Oct 8 2020 6:43PM
4 0
profile picture
CLQ
Posts: 2709 - Karma: 11,262
.nastyfunny! I still have this feeling like he just said inches by accident. haha who knows!


He must have, no way he is talking inches.
Oct 8 2020 7:57PM
5 0
profile picture
TRVP_ANGEL
Posts: 12548 - Karma: 116,889
CLQHe must have, no way he is talking inches.


actually hes probably talking in feet, the same way he measures his schlong
Oct 10 2020 12:22AM
8 0
profile picture
FullSendJoe
Posts: 7 - Karma: 28
Of your using quiverkillers you can always mount your bindings again further back as long as the holes are about a centimeter apart you will be fine.

There's a dude on the tgr forums that has put like 17 or more holes in his skis with inserts and they ski just fine
Oct 10 2020 6:18AM
0 0
profile picture
cydwhit
Posts: 5075 - Karma: 43,050
I wouldn't take ski advice from anyone who measures mount point in inches. That's just messed up.

But also, pro skiers are not known for being coherent. Durtschi either means inches, which makes him an idiot, or he messed up his units. Either way, that ski has plenty of sweet spot, it's not going to be the end of the world at all. And for the record, I HIGHLY recommend QC or helicoils in that ski. Its construction doesn't hold screws so well. My shift toes developed a wild amount of play because the holes ovalized on the single toe hole of the ski. Made me think it doesn't have the best binding matt coverage.

Can you imagine going into a ski shop and asking them to put in a mount -1.5 INCHES from center? I feel like they'd probably convert to cm just so their brains didn't explode.
Oct 11 2020 11:28AM
4 0
profile picture
Thegenericskier
Posts: 2681 - Karma: 30,879
better remount them at +10 cm
Oct 16 2020 9:22AM
1 0
All times are Eastern (-5)