Member of the Month

X_MEMESWERVE_XX
March, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Lip and tail slides

profile picture
Leachjack
Posts: 1 - Karma: 15
Can someone please explain the definition of a lipslide, tailslide, lipside 270 on and a tail side 270 on.

thanks
5 years ago
3 1
profile picture
TRVP_ANGEL
Posts: 12671 - Karma: 119,319
lipslide: jumping on the rail from the tail side on first
lipslide 270: 270 on to a rail so that the tails are over the rail before the tip
tailslide: jumping on normally but sliding on your tail with your weight back
tailslide 270: same thing i think but with a 270 on
5 years ago
5 0
profile picture
abar.
Posts: 1062 - Karma: 6,898
Lip is the back end of your skis over the rail first, so it's only tails first if it's regular, if it's switch lip it's tips first
5 years ago
0 0
profile picture
abar.
Posts: 1062 - Karma: 6,898
And switch tails on is just the opposite of switch lip, your tails go over the rail first. There is no such thing as regular tails on as that would just be regular lip. A tailslide/bluntslide is as described above and is not a way of getting on the rail but a way of sliding it
5 years ago
0 0
profile picture
Ghost_BLandzV2
Posts: 1037 - Karma: 8,432
Don’t call it tail slide say “Tail Press” instead. Its when you grind the rail and lean back super hard so that only the tails of your skis grind the rail.

Some people call it blunt slide also which is the same thing as a tail press but honestly imo tail press is better because blunt sounds like ur trying too hard. Both of them are accepted though.
5 years ago
8 0
profile picture
Ghost_BLandzV2
Posts: 1037 - Karma: 8,432
Side not its not really a true tail press unless you’re grinding behind the bindings but 97% of skiers arent good enough to do that so they just lean back a little and call it a tailpress lol.

Or if you try super hard to sound sick you’ll slightly lean back and be like “bro did you see me bluntslide the pvc wasnt that dope we should have clipped that maaa g” but irl you just came off early
5 years ago
5 0
profile picture
Leachjack
Posts: 1 - Karma: 15
I appreciate the responses but i think I have confused you, I’m more referring to the way you get onto the rail. In slvsh games they may say “tails on” or whatever. If you could explain the different ways to get onto a rail that would help me massively
5 years ago
3 0
profile picture
animator
Posts: 4571 - Karma: 26,389
So if they say switch tails on blind 2 for example, they ride up to the rail switch, and hop on by jumping and moving their tails over the rail, then do a blind 2 out.
5 years ago
0 0
profile picture
ParkRx
Posts: 330 - Karma: 1,426
I drawed you a picture
5 years ago
15 0
profile picture
Ghost_BLandzV2
Posts: 1037 - Karma: 8,432
ParkRxI drawed you a picture


If it was like 2 years ago id give you +k for those drawings 100%
5 years ago
6 0
profile picture
SofaKingSick
Posts: 9681 - Karma: 65,123
The simple way to look at it is:

lipslide = spinning away from the rail


and switch “tails” is just what people sometimes call going switch on to the rail non-lipslide (aka just switch on lol). Mostly just because some people consider that harder than switch lipslide
5 years ago
3 0
All times are Eastern (-4); Currently it's 2:19PM