Screwing in bindings

steezyclezyI'm upgrading my Pivots so don't need to drill new holes just need to unscrew the old bindings and attach new ones. Is it as simple as adding some wood glue and screwing in or is it a more complicated shop procedure? Thanks

If you very carefully unscrew the old bindings, then use a drop of high quality waterproof wood glue in each hole, keep track of which screws came from which holes, then hand thread the screws back in (your goal is to try to match up with the threads the screws cut when they were mounted the first time) torque to spec and you should be good to go.

People have done this countless times to replace the heel pieces on pivots when the brake takes a shit.