Member of the Month

X_MEMESWERVE_XX
March, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

School me on buttering

profile picture
Bachto
Posts: 400 - Karma: 954
Okay so I've been trying to learn butters and nose presses this year but i keep ejecting. I weigh 160 and my din is set at a 9. I ride SFB's from 4 years ago. Tell me how to stop sucking at skiing and what i need to do without maxing my dins and destroying my knees.
6 years ago
5 0
profile picture
shinbangclan
Posts: 1177 - Karma: 7,552
if you just wanted to nose press on flat I learned by grabbing both my tips and leaning forward until I fell over. While I did look like a retard it helped me feel out the flex of my skis. I used to pop out a lot because I tried to rise up and forward (which brought my heel up in my boot), but you really have to press the back of your heel into your boot and focus moving your weight lower and forward instead.

Not sure if that made a sliver of sense... just keep trying things and see what doesn't make you pop out.
6 years ago
8 0
profile picture
TRVP_ANGEL
Posts: 12657 - Karma: 118,840
crank up the din a bit so you dont eject on nose presses
6 years ago
7 1
profile picture
Bachto
Posts: 400 - Karma: 954
TRVP_ANGELcrank up the din a bit so you dont eject on nose presses


Could this cause issues with other skiing though? i really don't need knee surgery
6 years ago
1 1
profile picture
TRVP_ANGEL
Posts: 12657 - Karma: 118,840
BachtoCould this cause issues with other skiing though? i really don't need knee surgery


You'll be fine although 9 should be around the right din if you're a type 2-3 skier. If you are doing the butters correctly, you should not be ejecting. Crank em up to 9.5 and see if they still eject on flat ground butters, then go up by 0.5 if they do

**This post was edited on Mar 26th 2019 at 1:29:11pm
6 years ago
3 0
profile picture
JWillySkeez
Posts: 424 - Karma: 1,100
DIN is meaningless if your forward pressure is not set correctly. Go to a shop get that fixed then try again.
6 years ago
7 0
profile picture
shin-bang
Posts: 4106 - Karma: 7,036
idk, i used to just practice doing "tripod butters" (one arm down for support) or "snail butters" (both arms down and touching the snow while sliding.

however, since ive been on the billy goats my buttering days have come to an abrupt halt. Its mad fun to do like snail butter hand plant thingies if your on some softer sticks
6 years ago
1 0
profile picture
Johngreenacre
Posts: 626 - Karma: 4,558
at first, I would just try doing 180, with an immediate sw 180 afterward on rollers and knuckles and stuff. once you get comfortable doing this, start trying to put a little weight on your noses and try to bounce off them a bit. go faster and try to get some air for the sw 1 aspect, then try to go around another half to sw.

dont matter if they aren't super pressed in the beginning, its pretty scary and it takes some getting used to. Good luck!
6 years ago
2 0
profile picture
JAlps
Posts: 555 - Karma: 1,939
JWillySkeezDIN is meaningless if your forward pressure is not set correctly. Go to a shop get that fixed then try again.
.

What he said^^^. I’ll put money down your forward pressure is off
6 years ago
1 0
profile picture
SchlossAdler
Posts: 58 - Karma: 362
Third for forward pressure, my DIN is on 9.5, but it took me fixing my forward pressure to stop ejecting on butters. I'm also 6'1 and about 185 lbs.

Go to a shop and fix your forward pressure.
6 years ago
1 0
profile picture
_IRRELEVANT_
Posts: 944 - Karma: 4,427
I have no problems ejecting but I can only butter 180 or 270 how do I get the full 360.
6 years ago
0 0
profile picture
patskis22
Posts: 368 - Karma: 1,153
4th on the forward pressure haha. I weigh 165 lbs and my dins are set at 7.5/8. I snapped my ski the other day buttering so din really has nothing to do with it
6 years ago
0 0
profile picture
BigPurpleSkiSuit
Posts: 9557 - Karma: 70,853
Typically I go butter side up but i can see how that might not be intuitive to some
6 years ago
0 0
All times are Eastern (-4); Currently it's 10:47AM