Member of the Month

je_t.aime_canard
January, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Pivot and Attack Drill patterns

profile picture
milo-mcsenderson
Posts: 652 - Karma: 8,598
Hi guys,
Legit just a quick one, if I have pivots mounted on park skis dead centre and wanted to put Tyrolia Attacks on them would the drill pattern be too close to mount centre> would I have to shift them back a cm or 2 to make it work?
That is all
Dec 30 2018 6:30AM
1 0
profile picture
Greg_K
Posts: 961 - Karma: 2,785
MF-HARPHi guys,
Legit just a quick one, if I have pivots mounted on park skis dead centre and wanted to put Tyrolia Attacks on them would the drill pattern be too close to mount centre> would I have to shift them back a cm or 2 to make it work?
That is all


Same boot used and you’re fine as they are different enough to clear.
Using different sized boots then the pivots were originally mounted from and you might have conflicts.
Dec 30 2018 8:54AM
2 0
profile picture
milo-mcsenderson
Posts: 652 - Karma: 8,598
Greg_KSame boot used and you’re fine as they are different enough to clear.
Using different sized boots then the pivots were originally mounted from and you might have conflicts.


Cheers lad. Think the issues I’m having with my pivots is just forward pressure adjustments that Snow & Rock (Slush & Rubble) probably ballsed up during the mount... and I need to look at. Other option is the lighter tyrolias that I was considering over P12s anyway
Dec 30 2018 8:56AM
1 0
profile picture
Greg_K
Posts: 961 - Karma: 2,785
https://youtu.be/eIzcT642Ils

How to set forward pressure on pivot heel.
Dec 30 2018 9:19AM
1 0
profile picture
milo-mcsenderson
Posts: 652 - Karma: 8,598
Greg_Khttps://youtu.be/eIzcT642Ils

How to set forward pressure on pivot heel.


Thanks!! Was trying to find a good guide for forward pressure adjustment seems very easy tho!
Dec 30 2018 10:22AM
1 0
profile picture
BrawnTrends
Posts: 1102 - Karma: 2,440
Funny, I was looking for the same thing, but switching from Attack to Pivot. I checked mounting patterns online and thought they were different enough, but it's always nice to have confirmation.
Dec 30 2018 10:50AM
2 0
profile picture
Greg_K
Posts: 961 - Karma: 2,785
BrawnTrendsFunny, I was looking for the same thing, but switching from Attack to Pivot. I checked mounting patterns online and thought they were different enough, but it's always nice to have confirmation.


Going from Attack/traditional track heel bindings to Pivots will not have hole conflicts with the same boots but you might see the previous holes behind the Pivot heel that would be plugged. Usually have a ski color matching plug so it’s usually not that obvious and just a cosmetic thing.

Most binding swaps the old sealed holes are hidden under the new bindings but with the shorter footprint of the pivot heel you may see them.
Dec 30 2018 11:12AM
1 0
profile picture
BrawnTrends
Posts: 1102 - Karma: 2,440
Greg_KGoing from Attack/traditional track heel bindings to Pivots will not have hole conflicts with the same boots but you might see the previous holes behind the Pivot heel that would be plugged. Usually have a ski color matching plug so it’s usually not that obvious and just a cosmetic thing.

Most binding swaps the old sealed holes are hidden under the new bindings but with the shorter footprint of the pivot heel you may see them.


Yea that's not really an issue, it's on the first Blackops 118 so black plugs will be nearly invisible.
Dec 30 2018 11:48AM
1 0
All times are Eastern (-5)