Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Bending brakes in

profile picture
Mullet_man
Posts: 113 - Karma: 242
I am getting the k2 poacher (96 underfoot) and i found a deal on some fks but the brake is 115. will i be fine or will i need to bend them in or get new brakes?
Nov 11 2018 7:24PM
2 0
profile picture
Rum_Ham
Posts: 1449 - Karma: 4,482
Get new brakes. You can’t easily bend them in
Nov 11 2018 7:26PM
2 0
profile picture
Chinchi
Posts: 1591 - Karma: 4,212
eh i made the same mistake of trying to bend it in and it ended up being a moderate pain in the ass...if you can find smaller breaks for cheap do that
Nov 11 2018 7:30PM
3 0
profile picture
Auzy
Posts: 569 - Karma: 1,827
I made the mistake of putting 115s on my park skis and try to bend them in. It was a total pain in the ass all season, eventually had to replace the brakes with smaller ones. I’d say pass up unless it’s an extremely good deal, if it is swap out the brakes.
Nov 11 2018 8:10PM
1 0
profile picture
Mullet_man
Posts: 113 - Karma: 242
AuzyI made the mistake of putting 115s on my park skis and try to bend them in. It was a total pain in the ass all season, eventually had to replace the brakes with smaller ones. I’d say pass up unless it’s an extremely good deal, if it is swap out the brakes.


$135 and have only been used one season
Nov 11 2018 8:19PM
0 0
profile picture
Polar_Beer
Posts: 1515 - Karma: 228
FishesSpiel$135 and have only been used one season


Plus the price of new brakes ;)
Nov 11 2018 8:30PM
1 0
profile picture
Mullet_man
Posts: 113 - Karma: 242
would i be okay with the width tho or is it way too wide?
Nov 11 2018 8:39PM
0 0
profile picture
Rum_Ham
Posts: 1449 - Karma: 4,482
Mullet_manwould i be okay with the width tho or is it way too wide?


Way too wide. It will be annoying. I had 130mm brakes on 116mm skis and they caught all the time usually in bad situations
Nov 11 2018 8:50PM
1 0
profile picture
B-100
Posts: 76 - Karma: 383
Definitely worth it to just find some smaller fks brakes online and switch them out. You can bend brakes a little, but fitting a 115 brake onto 96 skis would be a huge pain, or would just cause you to catch the excess hanging off the edge if you ever tried to carve.
Nov 11 2018 9:04PM
1 0
profile picture
Mullet_man
Posts: 113 - Karma: 242
update so the guy selling them also has 80mm brakes. could i bend them to 96? if so whats the best way to do it?
Nov 11 2018 9:11PM
1 0
profile picture
Paul.
Posts: 1619 - Karma: 11,207
Dont do it, your brakes will hook together at the worst time possible and youll regret it
Nov 11 2018 9:12PM
0 0
profile picture
Rum_Ham
Posts: 1449 - Karma: 4,482
Mullet_manupdate so the guy selling them also has 80mm brakes. could i bend them to 96? if so whats the best way to do it?


Yes that would be better. That’s what people had to do till they started making wider brakes
Nov 11 2018 9:22PM
1 0
profile picture
Mullet_man
Posts: 113 - Karma: 242
Rum_HamYes that would be better. That’s what people had to do till they started making wider brakes


What’s the best way to do it though? I’ve never had to
Nov 11 2018 9:23PM
0 0
profile picture
Rum_Ham
Posts: 1449 - Karma: 4,482
Mullet_manWhat’s the best way to do it though? I’ve never had to


If you’re not mounting yourself the shop will usually do it. Put a pipe over the end after heating em up a bit and just bend.
Nov 11 2018 9:23PM
2 0
profile picture
weastcoat
Posts: 6437 - Karma: 74,337
Don’t do it. I got Brand new pivots for 140 with my desired brake width. But those kinds of deals are around Memorial Day, not middle of November. Just spend the extra money.
Nov 11 2018 10:52PM
0 0
profile picture
Non_State_Actor
Posts: 4934 - Karma: 17,670
Chinchi...if you can find smaller breaks for cheap do that


Cheap pivot brakes lol.
Nov 12 2018 2:24AM
2 0
profile picture
weastcoat
Posts: 6437 - Karma: 74,337
O yea... you can’t just buy new pivot brakes. You have to buy the whole damn heelpiece, and that wouldn’t be easy.
Nov 12 2018 9:40AM
0 0
profile picture
TBONE902
Posts: 266 - Karma: 708
An 80 mm brake might work ok, but I don’t think they have made one that width in recent memory - they come in 75, 95, 115, 130. Considering there is a brake that’s the perfect width for your ski, you should probably get that
Nov 12 2018 7:55PM
0 0
profile picture
B-100
Posts: 76 - Karma: 383
You should go to your local shop and see if they have some 95 pivot brakes
Nov 12 2018 11:04PM
0 0
profile picture
SofaKingSick
Posts: 9389 - Karma: 61,852
Mullet_manupdate so the guy selling them also has 80mm brakes. could i bend them to 96? if so whats the best way to do it?


yes i'd go this route. bending them out can work fine, bending them in is a mess
Nov 13 2018 10:26AM
0 0
All times are Eastern (-5)