Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Kids skis as ski blades

profile picture
cozzey
Posts: 1353 - Karma: 1,814
I could cop some 100 cm Volki Step JR 98 from a friend for $40. Would a shop let me mount these with sth 16s for my boot or would it be frowned upon?

Thanks for the feedback

May 15 2018 11:11PM
6 0
profile picture
Non_State_Actor
Posts: 4957 - Karma: 17,769
Mount them yourself? You'll need to do something with the screws, the screws from full-sized human bindings are too long for kids skis.
May 15 2018 11:27PM
5 0
profile picture
rohara
Posts: 146 - Karma: 366
There are some other things to consider- because the skis are significantly shorter than usual, the way they work as lever and exert force on your boot is very different, so say you got hold of some shorter screws to mount an sth16 to those and had DINs at 10, it would take way more force for them to release than if you had for example a 185cm ski attached.
May 16 2018 6:32AM
4 0
profile picture
cozzey
Posts: 1353 - Karma: 1,814
roharaThere are some other things to consider- because the skis are significantly shorter than usual, the way they work as lever and exert force on your boot is very different, so say you got hold of some shorter screws to mount an sth16 to those and had DINs at 10, it would take way more force for them to release than if you had for example a 185cm ski attached.

Well I could just set em at like 8 then. Or even less. And the chance of injury due to not releasing is far slimmer because of the smaller Ski meaning less chance of it being grabbed by something major and I won’t be hucking stuff like normally.
May 16 2018 8:40AM
2 0
profile picture
rohara
Posts: 146 - Karma: 366
cozzeyWell I could just set em at like 8 then. Or even less. And the chance of injury due to not releasing is far slimmer because of the smaller Ski meaning less chance of it being grabbed by something major and I won’t be hucking stuff like normally.


Yep that's all true dude, just letting you know.
May 16 2018 10:43AM
3 0
profile picture
cozzey
Posts: 1353 - Karma: 1,814
roharaYep that's all true dude, just letting you know.


Yeah I get what you’re saying. I also don’t know if you can really release from your basic Ski blades? Those binding seem pretty locked in.
May 16 2018 10:58AM
0 0
profile picture
snowpocalypse
Posts: 1036 - Karma: 3,525
Most likely you will rip the bindings off the ski the first day. The core is a thinner lighter wood or foam built for a child. The only way I would trust it would be to helicoil it. The labor for the mounting with helicoils would be around $120. hell if its worth it to you, go for it/
May 16 2018 11:40AM
2 0
profile picture
JibbaTheHutt
Posts: 2132 - Karma: 1,597
mount them yourself and have a blast, i've skied some 110 kids skis as blades before. took'em off 20ft jumps and did some backys. This was closing day though so it was mega soft, would not be keen for doing it when it was firm.
May 16 2018 1:16PM
2 0
profile picture
profa_212
Posts: 9010 - Karma: 37,481
Fuck it dude drill them yourself and have fun....dont do anything super high consequence where a pull out would result in injury(I mean you're on blades you probs won't be in this situation anyways) and have fun. I've always wanted to do something like this
May 16 2018 1:59PM
1 0
All times are Eastern (-5)