Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

STH Adjustments

profile picture
Crispy.
Posts: 6109 - Karma: 7,683
Hi everyone,

I have 2 pairs of STHs mounted. Both were done by the most reliable shop in my area, but over time the bindings have started to get a bit jiggly. In one pair, they are loose in the toe when i swing the ski side to side. This would be toe wing adjustment, correct?

In the other pair, they are loose in the toe when I swing the ski up and down. This would be a forward pressure adjustment, correct?

INB4 go to a shop, but the shop in my area charges out the ass for this kind of stuff. Thanks for the help everyone!
Jan 20 2018 8:50PM
1 0
profile picture
DrZoidberg
Posts: 5675 - Karma: 4,268
If the boot moves up and down in the toepiece while clicked in you'd be looking at a toe height adjustment, no?. What I've hard is to set forward pressure first, then adjust toe height. There's an AFD tool or the business card method for doing toe height.
Jan 21 2018 12:23PM
0 0
profile picture
onenerdykid
Posts: 6657 - Karma: 10,895
Crispy.In one pair, they are loose in the toe when i swing the ski side to side. This would be toe wing adjustment, correct?

In the other pair, they are loose in the toe when I swing the ski up and down. This would be a forward pressure adjustment, correct?

What do you mean "they are loose"? The binding toes pieces themselves are loose/jiggly, or the boot is loose/jiggly in the toe piece?
Jan 21 2018 12:50PM
0 0
profile picture
Crispy.
Posts: 6109 - Karma: 7,683
onenerdykidWhat do you mean "they are loose"? The binding toes pieces themselves are loose/jiggly, or the boot is loose/jiggly in the toe piece?


The boot is loose in the toe piece. In one pair of bindings, theyre loose up and down. In the other pair, theyre loose side to side.
Jan 21 2018 4:11PM
0 0
profile picture
Casey
Posts: 7849 - Karma: 24,311
Your boots may have worn down over time so they are loose now. Just a guess
Jan 21 2018 6:26PM
0 0
profile picture
Crispy.
Posts: 6109 - Karma: 7,683
CaseyYour boots may have worn down over time so they are loose now. Just a guess


Although tbe boots are old and do have wear, the bindings were mounted recently and the shop would not have mounted them if they were worn down to an unsafe extent.
Jan 21 2018 7:58PM
0 0
profile picture
onenerdykid
Posts: 6657 - Karma: 10,895
Crispy.The boot is loose in the toe piece. In one pair of bindings, theyre loose up and down. In the other pair, theyre loose side to side.


Up/down play is normally toe height adjustment

Side to side play is normally toe wing adjustment

Forward pressure should be double checked in either scenario.
Jan 22 2018 3:32AM
1 0
profile picture
Crispy.
Posts: 6109 - Karma: 7,683
onenerdykidUp/down play is normally toe height adjustment

Side to side play is normally toe wing adjustment

Forward pressure should be double checked in either scenario.


Thank you sir!
Jan 22 2018 11:42AM
0 0
All times are Eastern (-5)