Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

New Ski Company

profile picture
ahshit
Posts: 1248 - Karma: 3,024
Hey everyone, we are starting a new ski company. We have already begun to produce skis as prototypes, and are wondering if any of you would want to support the company, or give us ideas for a ski, or if you giuys could design a ski for us we could give it to you for free!
May 31 2017 11:22AM
180 33
profile picture
jjdsteeze
Posts: 2562 - Karma: 4,135
sounds legit
May 31 2017 11:49AM
17 0
profile picture
snowfinder
Posts: 2873 - Karma: 34,164
This sounds familiar........
May 31 2017 11:51AM
13 0
profile picture
Session
Posts: 5379 - Karma: 22,130
Well.....Here we go.
May 31 2017 12:01PM
5 1
profile picture
-SnowSnoli-
Posts: 756 - Karma: 1,703
May 31 2017 12:08PM
21 0
profile picture
OregonDead
Posts: 6890 - Karma: 24,554
You can use my idea and call it sickski. Just kick me down a percentage once you profit.
May 31 2017 12:42PM
16 0
profile picture
GrandThings
Posts: 3128 - Karma: 31,571
Bill? Is that you??
May 31 2017 12:58PM
28 0
profile picture
BirtDike
Posts: 1258 - Karma: 514
Make sure to use foam cores
May 31 2017 2:27PM
17 1
profile picture
ahshit
Posts: 1248 - Karma: 3,024
Right now I only have bamboo cores, but I am planning to switch to foam later.
May 31 2017 2:30PM
1 27
profile picture
BirtDike
Posts: 1258 - Karma: 514
instead of fiberglass, grind down the pubis of Gigantopithecus into a fine powder and melt it all over the skis
May 31 2017 2:40PM
9 0
profile picture
ahshit
Posts: 1248 - Karma: 3,024
Kinda the same thing, right now I have carbon fiber, and I am gonna use that up first
May 31 2017 2:59PM
1 2
profile picture
clorox
Posts: 1728 - Karma: 4,863
Make a clear ski, edges and all.
May 31 2017 3:54PM
16 0
profile picture
Sharko
Posts: 2274 - Karma: 4,101
Make a ski that travels through time
May 31 2017 6:49PM
9 0
profile picture
OregonDead
Posts: 6890 - Karma: 24,554
Linoleum bases!
May 31 2017 6:58PM
3 0
profile picture
BirtDike
Posts: 1258 - Karma: 514
Pharoahinstead of fiberglass, grind down the pubis of Gigantopithecus into a fine powder and melt it all over the skis


Temp is 435 kelvin
May 31 2017 7:16PM
2 0
profile picture
Rparr
Posts: 5562 - Karma: 45,583
Protip: Sand makes the best core

Source: the greatest skis ever made
May 31 2017 7:43PM
26 1
profile picture
Zypher
Posts: 2337 - Karma: 2,268
PharoahMake sure to use foam cores


Came here to say this
May 31 2017 7:51PM
4 0
profile picture
ahshit
Posts: 1248 - Karma: 3,024
RparrProtip: Sand makes the best core

Source: the greatest skis ever made


I want those
May 31 2017 8:08PM
3 0
profile picture
ahshit
Posts: 1248 - Karma: 3,024
Pharoahinstead of fiberglass, grind down the pubis of Gigantopithecus into a fine powder and melt it all over the skis


Im planning on using carbon, may switch though.
May 31 2017 8:10PM
0 6
profile picture
Sharko
Posts: 2274 - Karma: 4,101
1) Copy everything about the 186cm Rossi Sickle
2) Give it a different but referential name, like the 186cm Gucci Pickle
3) Profit
4) Cut me in
Jun 1 2017 4:15AM
15 0
profile picture
Skitrippin
Posts: 197 - Karma: 270
Sharko1) Copy everything about the 186cm Rossi Sickle
2) Give it a different but referential name, like the 186cm Gucci Pickle
3) Profit
4) Cut me in


I would buy any skis named Gucci Pickle in a fuckin heartbeat
Jun 1 2017 11:43AM
6 0
profile picture
Da.Vinci
Posts: 309 - Karma: 909
when you try to get ideas for your new company, and all you get is memes... lol
Jun 1 2017 6:18PM
2 0
profile picture
ahshit
Posts: 1248 - Karma: 3,024
Da.Vinciwhen you try to get ideas for your new company, and all you get is memes... lol


Hey, memes make dreams.
Jun 2 2017 11:17AM
2 1
profile picture
mthoodshredder
Posts: 85 - Karma: 146
Well shit here we go again, make a ski that is all carbon fiber or stainless steel
Jun 2 2017 11:34AM
2 0
profile picture
ahshit
Posts: 1248 - Karma: 3,024
mthoodshredderWell shit here we go again, make a ski that is all carbon fiber or stainless steel


Is their such thing as like 1 composite layer of carbon, and one layer of fiberglass?
Jun 2 2017 8:53PM
0 1
profile picture
ahshit
Posts: 1248 - Karma: 3,024
Sharko1) Copy everything about the 186cm Rossi Sickle
2) Give it a different but referential name, like the 186cm Gucci Pickle
3) Profit
4) Cut me in


Thinking Im gonna actually make that, Gucci Pickle here we come.
Jun 2 2017 8:54PM
1 1
profile picture
JoshWong
Posts: 2823 - Karma: 20,539
Sponsor me
Jun 3 2017 11:14AM
0 0
profile picture
Youngm_IPCME
Posts: 1082 - Karma: 2,851
Threads for the hope of the gucci pickle. I have been meaning to get a new pair of skis.
Jun 4 2017 8:49PM
0 0
profile picture
tdollo
Posts: 3770 - Karma: 18,528
RparrProtip: Sand makes the best core

Source: the greatest skis ever made


These are the bomb! You'll be blowing up the scene in no time
Jun 4 2017 10:39PM
6 0
profile picture
Militiaskis
Posts: 20 - Karma: 128
RparrProtip: Sand makes the best core

Source: the greatest skis ever made


tdolloThese are the bomb! You'll be blowing up the scene in no time


Now this is a graphic we could work with haha
Jun 5 2017 7:12AM
2 0
profile picture
snowfinder
Posts: 2873 - Karma: 34,164
MilitiaskisNow this is a graphic we could work with haha


Do it then I will take it to Utah and see all the skier dads lose it.
Jun 5 2017 7:38AM
3 0
profile picture
ahshit
Posts: 1248 - Karma: 3,024
snowfinderDo it then I will take it to Utah and see all the skier dads lose it.


ask them if they want to demo it...
Jun 5 2017 8:44PM
0 0
profile picture
ThunderChicken
Posts: 95 - Karma: 387
Make a ski that is designed for summer setups and urban, basically anything off the mountain that is harder on skis. Try to make them durable and cheap, so people can have a dedicated pair of skis for that kind of thing and a pair to keep nice for the mountain. Also custom graphics would be cool. I hope i'm not just ripping off some company I don't know with these idea's, but that's my input. Making the osama pros a thing would be cool as well.
Jun 5 2017 9:40PM
0 0
profile picture
BirtDike
Posts: 1258 - Karma: 514
Make a ski like the 2011 and 2012 K2 Obsethed. 189cm, 117mm underfoot, long-ish sidecut that runs the entire length of the ski(no taper). Soft, but heavy and damp. 2550g/ski. The long radius and weight will allow it to handle speed, crud and mank.

Or a ski like the mordecai, but with a heavy maple instead of Line's fkn cloud core. If Line made the mordecai with the same core as the opus, they would have absolutely killed it.
Jun 5 2017 10:22PM
2 1
profile picture
.FRY.
Posts: 5620 - Karma: 22,861
use cardboard to save money. great alternative.
Jun 6 2017 1:36AM
2 0
profile picture
snowfinder
Posts: 2873 - Karma: 34,164
.Fryuse cardboard to save money. great alternative.


https://www.newschoolers.com/videos/watch/869791/Totally-Disposable-Paper-Snowboard--Every-Third-Thursday
Jun 6 2017 9:45AM
0 0
profile picture
TrippTermini
Posts: 56 - Karma: 294
Make the skis ridged but buttery. Make cool topsheets and collab with ski clothing companies.
Jun 6 2017 2:45PM
0 0
profile picture
ahshit
Posts: 1248 - Karma: 3,024
TrippTerminiMake the skis ridged but buttery. Make cool topsheets and collab with ski clothing companies.


Im thinking maybe even Make like a dual-core, Something nice and stiff underfoot, and something softer closer to the tips.
Jun 6 2017 2:54PM
0 0
profile picture
TrippTermini
Posts: 56 - Karma: 294
sickskiIm thinking maybe even Make like a dual-core, Something nice and stiff underfoot, and something softer closer to the tips.


That is exactly what I want in a ski!
Jun 6 2017 2:57PM
1 0
profile picture
TheDoughAbides
Posts: 1319 - Karma: 4,036
just shape a pair of 2x4s by hand. take it back to the roots my man.
Jun 6 2017 3:24PM
4 0
profile picture
skiznuts
Posts: 462 - Karma: 784
oh BOY
Jun 6 2017 5:42PM
0 0
profile picture
ahshit
Posts: 1248 - Karma: 3,024
What about trying to make a cheap ski to sell cheaper. I saw a vid where these guys made a board for 100 with a polywall base and other cheap stuff.
Jun 6 2017 5:45PM
0 0
profile picture
Militiaskis
Posts: 20 - Karma: 128
sickskiWhat about trying to make a cheap ski to sell cheaper. I saw a vid where these guys made a board for 100 with a polywall base and other cheap stuff.


Why not just make a nicer ski and sel it cheaper?
Jun 7 2017 8:18PM
2 0
profile picture
Sharko
Posts: 2274 - Karma: 4,101
MilitiaskisWhy not just make a nicer ski and sel it cheaper?


Why not buy a cheap ski from China, slap your logo on it, sell it at a markup, and then tell NS how you are saving the industry from corporate greed?
Jun 7 2017 8:22PM
12 1
profile picture
JmckR
Posts: 1279 - Karma: 5,871
Design them so they can split in half or even quarters to make them easier to transport
Jun 8 2017 7:48AM
1 0
profile picture
JmckR
Posts: 1279 - Karma: 5,871
Design them so they can split in half or even quarters to make them easier to transport
Jun 8 2017 7:49AM
1 0
profile picture
TheDoughAbides
Posts: 1319 - Karma: 4,036
SharkoWhy not buy a cheap ski from China, slap your logo on it, sell it at a markup, and then tell NS how you are saving the industry from corporate greed?


Jun 8 2017 8:15AM
6 0
profile picture
SvensDaukss
Posts: 7 - Karma: 237
Do pre orders, you will make a lot of money and you don't even need to ship the skis!
Jun 8 2017 9:52PM
9 0
profile picture
ahshit
Posts: 1248 - Karma: 3,024
Gonna reopen this forum, started doing more construction I tried the dual core idea and fucked it up. Going with bamboo core, actual carbon underfoot, and most likely fiberglass in the tips. I bought a roll of cork to experiment with, you guys got any ideas?
Jun 19 2017 3:05PM
0 0
profile picture
Coloradoskier03
Posts: 174 - Karma: 501
make skis made out of stickers
Jun 19 2017 3:55PM
2 0
profile picture
Sharko
Posts: 2274 - Karma: 4,101
How did the Gucci Pickle turn out? Dibs on the first pair.
Jun 19 2017 4:20PM
1 0
All times are Eastern (-5)