Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

FT Liner Issue

profile picture
OhJay
Posts: 323 - Karma: 1,146
Hi all,

I pulled out my liner from first chair 10s the other day to help it dry and noticed I'm getting a rip along the outer ankle area on my right liner only after putting several days on them.

It appears the screw (t-nut?) from one of the buckles is just long enough that it's sticking out into the shell and chafing the outer surface of the liner when flexing my ankles. It's gotten to the point where the first layer has been ripped through already. I've contacted FT's customer service, but have a feeling providing extra screws is all they can do at this point. I'm pretty doubtful of this since feeling around, several other screws also seem to be jutting out a little (but hasn't been an issue since it's only the ankle area that moves and rubs against the screw).

Has anyone else experienced this issue? I'm not a handy man by any means, so any obvious tips are welcome. My last ditch plan is to just keep covering it with duct tape after every x amount of days...

We've had a good season in the Northwest so I'm planning on riding well into the summer, so I'm just trying to fix this before it becomes a bigger problem.
May 15 2017 2:57PM
2 0
profile picture
FullTiltBoots
Posts: 477 - Karma: 2,761
Hi! Bummer and sorry that happened! Yes sometimes those T-nuts can stick out a bit and snag the liner if they're not screwed in really tight. If you didn't through away the box they came in there's a little bag with a bigger heel shim and also little fabric stickers that you can cover the rip with (it's basically a batch). Tighten down the T-nuts with a screwdriver and with the liner out the boot run your hand inside and see if there's any other potential problems and you can use the rest of those little stickers to hopefully reinforce and prevent any more snags from happening. Thanks and feel free to contact CS if you have any more issues. -jm
May 15 2017 5:16PM
1 0
profile picture
Deepskier
Posts: 3267 - Karma: 4,827
Yeah that happened to mine.
May 15 2017 5:28PM
0 0
profile picture
OhJay
Posts: 323 - Karma: 1,146
FullTiltBootsHi! Bummer and sorry that happened! Yes sometimes those T-nuts can stick out a bit and snag the liner if they're not screwed in really tight. If you didn't through away the box they came in there's a little bag with a bigger heel shim and also little fabric stickers that you can cover the rip with (it's basically a batch). Tighten down the T-nuts with a screwdriver and with the liner out the boot run your hand inside and see if there's any other potential problems and you can use the rest of those little stickers to hopefully reinforce and prevent any more snags from happening. Thanks and feel free to contact CS if you have any more issues. -jm


Thanks for the reply! I see what you're talking about, I'll give it a shot and see if it helps.
May 16 2017 12:34PM
0 0
All times are Eastern (-5)