Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

ATOMIC INFAMOUS

profile picture
Dkim_10
Posts: 106 - Karma: 60
I have the 2016 Atomic Infamous skis, I was wondering if it is common from tip to tail on the ends of the skis on the edges to the side wall kind of separate less than a mm? Because on the ends of my tips are a tiny bit separated from the edge to the sidewalk(around/less than a mm). Even though it had bolts holdting it together does this really matter?
Dec 21 2016 3:41PM
1 0
profile picture
twatt_chaurus
Posts: 470 - Karma: 1,682
Something like this? Not my pic, but i had a similar problem on my infamous 13's, but worse. The base also blew off through the rivets, had to smash it back in every now and then. At least on the older models this was a common issue, thought they would have fixed it by now. It shouldn't make much of a difference unless it's really bad like mine were. Didn't even get to warranty mine...
Dec 21 2016 9:59PM
0 0
profile picture
Dkim_10
Posts: 106 - Karma: 60
twatt_chaurusSomething like this? Not my pic, but i had a similar problem on my infamous 13's, but worse. The base also blew off through the rivets, had to smash it back in every now and then. At least on the older models this was a common issue, thought they would have fixed it by now. It shouldn't make much of a difference unless it's really bad like mine were. Didn't even get to warranty mine...


Yeah mine looks exactly like that but not as bad at all.

Do you think I would epoxy it together?
Dec 21 2016 10:02PM
0 0
profile picture
twatt_chaurus
Posts: 470 - Karma: 1,682
Dkim_10Yeah mine looks exactly like that but not as bad at all.

Do you think I would epoxy it together?


If they aren't even that bad i wouldn't bother with fixing them, but i think epoxy is the way to go if you want to.
Dec 21 2016 10:10PM
0 0
All times are Eastern (-5)