Member of the Month

je_t.aime_canard
January, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

SAUCER BOY NEEDS HELP ADJUSTING SKI BLADES

profile picture
joelski
Posts: 1014 - Karma: 736
my friend just gave me some kneissil piper ski blades with kneissil bindings and i have no clue how to adjust them to my boot. the bindings are too tight! I have tried pulling and pushing everytghing to no avail. there are markings on the front and back binding that have numbers and letters designating where the binding could be adjustible i just havent been able to move the metal loops that go around the boot to the different possitions. THESE ARE SKI BLADE SPECIFIC NON RELEASABLE BINDINGS I KNOW HOW TO ADJUST NORMALL SKI BINDINGS

i will post some pictures up asap
Oct 31 2016 2:52PM
0 0
profile picture
joelski
Posts: 1014 - Karma: 736
oh y and their for a halloween party tonight if that wassnt obvious
Oct 31 2016 2:52PM
0 0
profile picture
joelski
Posts: 1014 - Karma: 736
heres the pic sorry for tripple post
Oct 31 2016 3:00PM
0 0
profile picture
danbrown
Posts: 11939 - Karma: 21,833
you gotta pull the circular tab on the front all the way out, and then push the metal part down and slide it forward or backwards. the slider thing is probably pretty stuck so you might need a flathead screwdriver and even a hammer to get it moving.
Oct 31 2016 3:05PM
0 0
profile picture
HaydenWrong
Posts: 986 - Karma: 2,165
something could be stuck there should be tabs that slide out releasing the metal bars an making them adjustable.. i ended up cutting my bindings an remounting them as they did not adjust big enough to my new boot good luck saucer boy !!!
Oct 31 2016 3:07PM
0 0
profile picture
joelski
Posts: 1014 - Karma: 736
danbrownyou gotta pull the circular tab on the front all the way out, and then push the metal part down and slide it forward or backwards. the slider thing is probably pretty stuck so you might need a flathead screwdriver and even a hammer to get it moving.


thanks dan, i saw a video that said to do that however with these bindings the circular tab is imobile its part of the same plastic that makes up the rest of the toe peice and the same is true with the tab in the heal
Oct 31 2016 3:07PM
0 0
profile picture
joelski
Posts: 1014 - Karma: 736
still need help
Oct 31 2016 5:18PM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
Just shave your boot down.
Nov 1 2016 12:52AM
0 0
profile picture
Hugh_Conway_jr
Posts: 746 - Karma: 467
Just take the bindings off and screw your boot directly to the snow blade. It will reduce the stack height big time.

Saucer Boy is more than a halloween costume. Its a lifestyle choice. Time to commit.
Nov 1 2016 1:10AM
0 0
All times are Eastern (-5)