Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Forward pressure indicator AAAmbition binding?

profile picture
smokeyjack2000
Posts: 154 - Karma: 60
Hello,

I am wondering if anyone can help me with the setting the forward pressure on the AAAmbition 12 binding. It is fairly easy to adjust the toe height, DINS and BSL (on both the central bar and the worm screw on the the heel piece however I cannot find any indicator if the forward pressure is correct.

Last season I set them up without checking and found that I had several prereleases. There could have been several reasons for this as my boot lugs are worn a bit and I had just come off STH16s in the morning.


If anyone knows how to check the forward pressure on the AAAmbition that would be very helpful.

Many thanks.
Sep 10 2016 8:57AM
0 0
profile picture
smokeyjack2000
Posts: 154 - Karma: 60
Cancel... i have found the answer. If the worm screw is flush then the pressure is correct.

Word of warning to anyone buying the binding - you have to get the BSL right from the word go as if you adjust the bar afterwards then the part that locks the heel piece for skiing will not fit.

I had these bindings fitted by a shop in France who did not know what they were doing and have now discovered that the bar length was incorrect when the bindings were fitted and so now I need a redrill.

In most of Europe you will be better off with Marker AT bindings as that is what the shops know.
Sep 10 2016 10:49AM
0 0
All times are Eastern (-5)