Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Brake Width Help

profile picture
sam_minton
Posts: 59 - Karma: 884
Just bought 90mm underfoot skis and was wondering firstly, if a 90mm brake would fit, and if not, what size brake would be best. I heard 15mm above the width is the sort of range you want it to be in, but does 90mm fit 90mm?

Cheers
Aug 2 2016 3:20AM
0 0
profile picture
Jaggy_Snake
Posts: 2287 - Karma: 1,418
Just bend the brake arms slightly. They'll be fine.
Aug 2 2016 1:34PM
0 0
profile picture
.Hugo.
Posts: 17360 - Karma: 28,488
Yes 90 will work
Aug 2 2016 4:15PM
0 0
profile picture
ModMommy
Posts: 10840 - Karma: 57,643
90 will work just fine! You can bend brakes 6mm before they start to act funny.
Aug 3 2016 1:07AM
0 0
profile picture
Julius_Steezer
Posts: 776 - Karma: 4,546
safarisam90 will work just fine! You can bend brakes 6mm before they start to act funny.


As in 6mm each side or 6mm total?

So 90mm brakes would work on a ski with width 102mm or 96mm?
Aug 3 2016 11:02AM
0 0
profile picture
ModMommy
Posts: 10840 - Karma: 57,643
Julius_SteezerAs in 6mm each side or 6mm total?

So 90mm brakes would work on a ski with width 102mm or 96mm?


I usually do it as total as to not compromise the metals abilities. .

my rule of thumb is if I have to bend it so much the shape is dramatically altered, then I'm moving up brake sizes.
I personally wouldn't use a 90mm breaks on a ski that's 102 underfoot, because the brakes will be bent so much you'd be better off using a 110 mm brake, and bending it in with a bit of hang.
Aug 3 2016 2:59PM
0 0
All times are Eastern (-5)