Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Look pivot binding adjustment?

profile picture
Gdog213
Posts: 17 - Karma: 79
Hey NS I just bought a pair of ar7 with pivot 14s. The problem is that the binding is set for a 30cm boot and I'm 27.5cm boot. Is there a way to adjust them without re drilling? I know it's a pretty rookie question but I've never had pivots before. Thanks
Feb 6 2016 8:18PM
5 0
profile picture
freeski1620
Posts: 5670 - Karma: 1,718
If those are the actual sole lengths of the boots then you will need a remount. if those are the sizes you will need a remount. You're gonna need a remount.
Feb 6 2016 8:41PM
2 0
profile picture
Gdog213
Posts: 17 - Karma: 79
freeski1620If those are the actual sole lengths of the boots then you will need a remount. if those are the sizes you will need a remount. You're gonna need a remount.


Is there no way to adjust pivot bindings?
Feb 6 2016 8:46PM
0 0
profile picture
freeski1620
Posts: 5670 - Karma: 1,718
Yes but only about 8mm either direction from where it is mounted or a boot size.
Feb 6 2016 8:53PM
1 0
profile picture
Gdog213
Posts: 17 - Karma: 79
freeski1620Yes but only about 8mm either direction from where it is mounted or a boot size.


Ok thanks, the bindings are set at 301mm and mine are 315mm so I guess that doesn't work eh?
Feb 6 2016 9:24PM
0 0
profile picture
freeski1620
Posts: 5670 - Karma: 1,718
Gdog213Ok thanks, the bindings are set at 301mm and mine are 315mm so I guess that doesn't work eh?


Nope. You'll need a remount.
Feb 8 2016 6:34PM
1 0
profile picture
shin-bang
Posts: 4100 - Karma: 6,997
Gdog213Ok thanks, the bindings are set at 301mm and mine are 315mm so I guess that doesn't work eh?


Yea my personal rule is 7mm if they're set in the middle ring. So sorry m8, you'll need a remount. As long as your shop does a good job, there shouldn't be anything to worry about
Feb 9 2016 12:16AM
0 0
profile picture
bmiltenberg
Posts: 1 - Karma: 10
Anyone have good instructions on how to adjust the look pivot 14 AW? I've got to go from 320 to a 317 length, hoping to avoid going to a shop at all, but i'm also an idiot, so there's that. thanks.
Mar 6 2019 9:18PM
0 0
All times are Eastern (-5)