Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
Are binding's brakes interchangeable
Posts: 6
-
Karma: 31
If I bought some bindings with 90mm Brakes and wanted to put 125mm brakes on them would they be interchangeable. If so would any brand of brakes be suitable are they standard?
Eg, Atomic bindings, atomic brakes.
Or Rossignol Bindings, marker brakes
Any help would be great.
Thanks
Posts: 9894
-
Karma: 3,585
brakes are specific to the model of binding. so, for example, any sth brake will fit on the sth binding, so you can easily swap out the two. however, a sth brake will not fit on the sth2, as it has a different brake mount. for the most part, brakes will not work between brands, but there are some exceptions: rossi and look are the same bindings, just rebranded, so they can be swapped as long as the specific model is the same. and atomic and salomon co-developed the guardian, so brakes for the salomon guardian will work on atomic trackers (again same model of binding, just rebranded)
Posts: 6
-
Karma: 31
Well that's fantastic. So just match the binding model with the brake and bump it up a size. Great thanks so much for the info will save me ££££
plus much K
Posts: 399
-
Karma: 207
Depends on the Brand, e.g for Tyrollia the peak 11,12,15 are all interchangeable but the 18 uses a different brake.
The handy one is solly (I'm not sure on the WTR versions), the brakes can be dismantled and the arms are all the same I swapped the arms out of the pads on my S914's into my new STH16's
Posts: 13785
-
Karma: 1,956
Some companies are interchangeable depending on the model
Salomon=atomic
rossi=look
tyrollia=peak=head=some 4frnts
marker=marker
Posts: 1167
-
Karma: 8,556
there is nothing you can't fix with duct tape and zipties
All times are Eastern (-5)
