Member of the Month

X_MEMESWERVE_XX
March, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

J Skis Problem @JLev

profile picture
frontswap
Posts: 194 - Karma: 312
My J Skis All Play have chipped a lot along the sides of the topsheets. I have only skied them in park for three days this season. Their performance is great, but I'm afraid the good-looking graphics will not be so good-looking by the end of the season. I'm fairly disappointed, thinking about just using them for urban... Has anyone else experienced this?Thoughts?
9 years ago
16 4
profile picture
sbarlett
Posts: 882 - Karma: 4,255
if you bevel your topsheets with sandpaper it can reduce the chipping, but it's just something that happens to park skis. get used to it
9 years ago
4 0
profile picture
DrZoidberg
Posts: 5676 - Karma: 4,299
This is from you hitting your edges on the topsheets. No skis are going to survive you banging sharp, metal edges into the topsheets without a little damage and chipping. Land better, don't cross your skis and don't smack them together on the lift and it'll stop.
9 years ago
0 0
profile picture
Anesteezia
Posts: 239 - Karma: 1,386
Just Facebook Jason, he's a normal dude. Post pics if you really think they are that bad.

I have a pair of Whip-its that I call my "beaters" but they are still in great shape. I put those things through the wringer during 70 days last year and the only chip is from dropping them in the parking lot.

I haven't heard many topsheet problems regarding J Skis so just talk to JLev about it.
9 years ago
0 0
profile picture
brett_fisher
Posts: 2419 - Karma: 10,518
just email him you don't need to put him under the bus here
9 years ago
3 1
profile picture
Swandog7
Posts: 4957 - Karma: 9,033
you'll be fine, its cosmetic. Detune your edges because ill garuntee you didnt 85% of the time. That will help a bit
9 years ago
0 0
profile picture
pduncan
Posts: 1133 - Karma: 1,615
I have heard they have less durable top sheets than a lot of skis but they are still good skis. I wouldn't use them as urban skis just because they have chipping on the top sheet though.
9 years ago
0 0
profile picture
.lencon
Posts: 6753 - Karma: 17,197
all sandwich constructed skis, and most cap skis, will end up chipping. The best thing to do is to take a palm sander and bevel your top sheets off at like a 45 degree angle. Also, chipping will be at its worst the first couple of weeks you have your skis because your edges are brand new and sharp af. Just think about OP, sharp steel edges are gonna win 99.999999% of the time against standard top sheet material.


so yeah just bevel top sheets with a palm sander.
9 years ago
0 0
profile picture
PacificRimJob
Posts: 24730 - Karma: 30,008
Topsheets chip. get used to that lol.
9 years ago
1 0
profile picture
eheath
Posts: 61890 - Karma: 125,961
Have you ever owned non-cap skis before?
9 years ago
1 0
profile picture
shin-bang
Posts: 4106 - Karma: 7,036
.lenconall sandwich constructed skis, and most cap skis, will end up chipping. The best thing to do is to take a palm sander and bevel your top sheets off at like a 45 degree angle. Also, chipping will be at its worst the first couple of weeks you have your skis because your edges are brand new and sharp af. Just think about OP, sharp steel edges are gonna win 99.999999% of the time against standard top sheet material.


so yeah just bevel top sheets with a palm sander.


This. I've done it for the past 5 pairs of my skis and it's worked wonders
9 years ago
0 0
profile picture
frontswap
Posts: 194 - Karma: 312
.lenconall sandwich constructed skis, and most cap skis, will end up chipping. The best thing to do is to take a palm sander and bevel your top sheets off at like a 45 degree angle. Also, chipping will be at its worst the first couple of weeks you have your skis because your edges are brand new and sharp af. Just think about OP, sharp steel edges are gonna win 99.999999% of the time against standard top sheet material.


so yeah just bevel top sheets with a palm sander.


Thanks! I might try this
9 years ago
0 0
All times are Eastern (-4); Currently it's 9:34AM