Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Best way to detune ski edges for rails?

profile picture
IncognitoXL
Posts: 68 - Karma: -31
i was just curious what other people do. I usually get a rock and just rub the edges on the middle two feet or so of each ski.
I usually make them pretty soft underfoot. How much is enough to make sure they arent sticking to rails?
Aug 28 2015 2:05PM
39 10
profile picture
IncognitoXL
Posts: 68 - Karma: -31
such a noob question but i was just wondering if my current procedure was sub optimal
Aug 28 2015 2:12PM
1 0
profile picture
tomPietrowski
Posts: 7142 - Karma: 17,428
Haha yes a rock will be a horrible way to do it.

Best at way is wit an edge file. You want to slowly round off the sharp edge with talking too much off the edge. You want to do long passes with the file and release pressure at the end. Once you are happy the edge is rounded you can take a gummy stone and clean up the edge. The file will leave slight marks and you use the gummy to help clean these up. A few passes with the stone should be good.

You ou probably want to detune the area under the bindings an maybe a little further if you like to nose and tail press and you also want to detune the contact point of the ski ( the area the bases meet). This helps make the ski less catchy and just helps them ride better.
Aug 28 2015 2:30PM
2 0
profile picture
404404
Posts: 11358 - Karma: 21,034
#wizardzwax file.
Aug 28 2015 2:39PM
5 0
profile picture
FettySwap
Posts: 192 - Karma: 581
i use a gummy stone, works great.
Aug 28 2015 2:43PM
0 0
profile picture
Elg
Posts: 2998 - Karma: 3,880
hit rails
Aug 28 2015 3:03PM
3 4
profile picture
Swandog7
Posts: 4955 - Karma: 9,021
Use the search bar dude. I just commented on this same thread 2 days ago. Anyway, I recommend a file, diamond stone and gummy stone
Aug 28 2015 4:01PM
0 0
profile picture
Titus69
Posts: 9329 - Karma: 17,816
lol


gummystones work the best
Aug 28 2015 4:35PM
1 0
profile picture
JohnLocke
Posts: 337 - Karma: 1,057
Elghit rails


This, my friend, is the answer
Aug 28 2015 5:33PM
4 2
profile picture
Elg
Posts: 2998 - Karma: 3,880
ck0belskiThis, my friend, is the answer


I'm questioning myself, we both got down voted..
Aug 29 2015 10:23AM
0 2
profile picture
Mingg
Posts: 13973 - Karma: 49,218
Elghit rails


ck0belskiThis, my friend, is the answer


I'm pretty sure if you hit rails before/without detuning your edges it'll be easier to fuck them up
Aug 29 2015 12:27PM
4 1
profile picture
steezelord420
Posts: 141 - Karma: 1,009
Being a racer and seeing that you purposely use a rock on your edges makes me want to cry a little bit tbh...
Anyway gummy stones work real good and even just rounding your edge out with a regular finishing stone works great too.
Aug 29 2015 1:09PM
1 1
profile picture
theabortionator
Posts: 51584 - Karma: 161,684
File or gummy stone depending on how gnar you're going.

Don't use a rock. The biggest thing is getting everything even and clean whether you're going mellow or full on rounded.

I would recommend taping off the area you plan to detune on both skis so you are consistent. Also try and do it evenly. If you do all your edges differently, you can have some turning issues until they where in.


Don't detune it a shit ton just because you heard you have to. Go somewhat mellow if you haven't before. Honestly I had one of my boards straight rounded. But that's what I wanted, something that wouldn't hook into rails no matter what. That said I couldn't turn on ice at all, that was my trade off.

Basically, any place on the spectrum is fine but just don't over do it unless you know you're going to be down with that. Easy to take your edges down more, not as easy to bring them back if you fuck them up.

Might not be a bad idea to do it while hitting a summer set up or opening weekend. Have a file and gummy stone with you IF you feel like it needs to be taken down more you can, but if you find a spot you like, you can stay. Instead of realizing you went way t far.

Good luck man!
Aug 29 2015 1:20PM
0 0
profile picture
CHORIZO
Posts: 2003 - Karma: 10,039
ParryWithAnA#wizardzwax file.


Shameless self promo. Will wizard wax get me into the sorcerers guild?
Aug 29 2015 1:21PM
0 0
profile picture
C_dub
Posts: 373 - Karma: 2,327
You need a pedo-file
Aug 29 2015 11:20PM
5 0
profile picture
Malcolm
Posts: 15951 - Karma: 9,451
tomPietrowskiHaha yes a rock will be a horrible way to do it.


I guess I've been doing it wrong all along. There's something awesome about using a rock as a tool though. Just the other day we needed a flathead screwdriver for this screw and my buddy found this tiny flat rock instead. Felt like cavemen discovering fire for the first time.
Aug 29 2015 11:38PM
4 0
profile picture
tomPietrowski
Posts: 7142 - Karma: 17,428
MalcolmI guess I've been doing it wrong all along. There's something awesome about using a rock as a tool though. Just the other day we needed a flathead screwdriver for this screw and my buddy found this tiny flat rock instead. Felt like cavemen discovering fire for the first time.


I'm all for getting all caveman when it's needed haha
Aug 30 2015 12:29AM
0 0
profile picture
Newschoolers55
Posts: 851 - Karma: 4,792
Could I use sandpaper for detuning because i dont have a file
Aug 30 2015 3:04PM
0 0
profile picture
.lencon
Posts: 6753 - Karma: 17,183
Volvo242Could I use sandpaper for detuning because i dont have a file


Yeah just a fine piece of it
Aug 30 2015 3:34PM
0 0
profile picture
Newschoolers55
Posts: 851 - Karma: 4,792
.lenconYeah just a fine piece of it


Ok thanks!
Aug 30 2015 3:41PM
0 0
profile picture
Crispy.
Posts: 6108 - Karma: 7,678
When detuning with a file, should i keep the file 45 degrees to the edge or make rounded sweeping motions?
Apr 6 2016 1:36PM
0 0
profile picture
sbarlett
Posts: 882 - Karma: 4,255
Crispy.When detuning with a file, should i keep the file 45 degrees to the edge or make rounded sweeping motions?


i go for a bit at 45 then go with a few different angles after that so it eventually rounds out, just play with it until you notice the edge is a little rounded
Apr 6 2016 1:42PM
0 0
profile picture
Aharrelson358
Posts: 356 - Karma: 478
ParryWithAnA#wizardzwax file.


Yo where can I get some Wizard wax?
Apr 6 2016 9:08PM
0 0
profile picture
Aharrelson358
Posts: 356 - Karma: 478
Dumb question. I found the site haha ^^^
Apr 6 2016 9:12PM
0 0
All times are Eastern (-5)