It looks like you are using an ad blocker. That's okay. Who doesn't? But without advertising revenue, we can't keep making this site awesome. Click the link below for instructions on disabling adblock.
Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post.
Register to become a member today!
I was thinking about painting my k2 presses i just wanted to to know what kind of paint to use. What kind of based paint, oil? Rubber? And how many layers of paint. As well as how much sanding needs to be done. Any other genral help or advice would be helpful! And K+ to anyone who helps me out.
I painted some old straight skis with rustoleum using 4 coats, drew stuff with sharpies then did a clear coat. Haven't gotten to really test the durability cause the bindings broke but it seems alright. I doubt they will last forever though.
I have never done it personally. But the thing I would watch out for with the sanding specifically is the fact that you wont sand strait to wood. Make sure not to sand through the top sheet or you will damage the fiberglass wrap that they put around the wood core for structure.
An ideal ski for doing this would be a pair of line afterbangs (since you could actually sand off the graphic and it would just be wood under).
Best of luck to you and I hope that at least helps with a small step in the process!
i was lucky enough to have my dad work at a college so the autobody guys panted them and clear coated them. they did 1 coat of black then like 3-5 coats of clear coat. mine were delaming so i stripped the topsheet with a chisel so all of the ski was on the same layer
shin-bang
i was lucky enough to have my dad work at a college so the autobody guys panted them and clear coated them. they did 1 coat of black then like 3-5 coats of clear coat. mine were delaming so i stripped the topsheet with a chisel so all of the ski was on the same layer
The skis look really nice have you had a chance to use them? Any durability issues chipping ect?
speedyswapper34The skis look really nice have you had a chance to use them? Any durability issues chipping ect?
Oh yes they looked amazing. But now they look like poop. They chipped so bad revealing the previous color of the skis. I can post a pic here in a few if you'd like me to
shin-bangOh yes they looked amazing. But now they look like poop. They chipped so bad revealing the previous color of the skis. I can post a pic here in a few if you'd like me to
i took these just for you op. ive basically hammered them and theyve chipped pretty bad. you can practically peel the paint off of them so idk if ill repaint them again or not
Did some research and asked a few guys and i think im gonna go with an oil based rust primer and 3 layers of oil based rust paint on top. Thanks for the help boys
speedyswapper34Did some research and asked a few guys and i think im gonna go with an oil based rust primer and 3 layers of oil based rust paint on top. Thanks for the help boys
