BUCKET CLIPS 3 | A FLINTA Ski Mixtape

Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

NS, Help me with my skateboard!

profile picture
Slush
Posts: 1916 - Karma: 12,953
Hey guys!

I've recently started skateboarding with an old skateboard I own, and I love it! My friend has as well, and here is my problem.

My friend is using his brother's skateboard. It's a legit skateboard, an element deck. Anyways, his board is a lot popier and trickable it seems, but skinny and just rides different. My skateboard rides like a dream, but I think it's because his is really beat up.

I'm thinking of buying a new deck, or new wheels, or a new board all together! I don't know what I should do. Here's my board, let's see if you guys can figure this out


It's 31in long and 8in wide.



It has metal trucks, and the bearings will roll for a while


It's concave, and seems like it has longboard wheels?



"Well gee OP, why don't you search that link?" I've tried, it seems the website is gone. I've googled Oogaboogainc, oogaboogainc.com, oogabooga, OBI, OBI2000, ect ect.... I can't find a single thing about this board! It's like, some obscure company made it and then went out of business. The board, I should mention, is kinda old I think.

I love this board, but i'm just wondering what it is. Longboard? Street board? Vert? Don't know much about skateboards, anything is appreciated!
POLL
Edit Poll
Votes:

Take care when editing a poll; Options should be similar to maintain vote integrity.

More options will be added automatically as you type. You must supply a question and at least two options. No HTML is allowed.

Apr 13 2015 8:44PM
53 7
profile picture
Slush
Posts: 1916 - Karma: 12,953
I forgot to mention, sorta, that I am looking to possibly make an upgrade to my board, to make it better for skating. Like doing tricks and stuff
Apr 13 2015 8:46PM
0 0
profile picture
Ghoster
Posts: 261 - Karma: 1,871
I find chocolate decks really poppy, as well as krooked decks. I like an 8.25", but it really depends on your your preference. As for your board riding like a dream, it's because you have some pretty big, presumably soft wheels on it. Nothing wrong with soft wheels, but the bigger they are the higher you will be off the ground, the heavier your board will be, and more force will be required for popping. I prefer hard and small wheels so I can powerslide the shit out of things and have a low profile board. Your trucks look pretty budget, but you can get away with using them until you have money to burn, or the bushings wear out.

TL;DR Its mainly personal preference.
Apr 13 2015 9:17PM
0 0
profile picture
CaptainObvious.
Posts: 5712 - Karma: 20,638
You're just starting. Your deck will snap. Get a mini logo and put the savings into quality trucks and bearings.
Apr 13 2015 9:20PM
7 0
profile picture
esotericjive
Posts: 1889 - Karma: 1,445
Recommend an earthwing, get a 33inch they're also slightly wider which can be nice for bigger feet and going silly fast
Apr 13 2015 9:46PM
0 0
profile picture
Thom4s
Posts: 213 - Karma: 1,079
I've had the same Bones STF wheels, thunder trucks and reds bearings for years. I'd say it's worth it to spend your money on the highest quality trucks, wheels, hardware etc. out there if you are going to be spending lots of time skating. Less cost in the longrun considering you will be replacing these parts less. As for decks however, I can razortail a new deck every week so I try not to spend a ton on them.
Apr 13 2015 11:18PM
0 0
profile picture
dingus
Posts: 1328 - Karma: 7,879
Wearing huf socks really help, the more pot leafs the better
Apr 13 2015 11:20PM
21 0
profile picture
soccerzla7
Posts: 127 - Karma: 524
TwinipzIt's a legit skateboard, an element deck.


haha
Apr 14 2015 2:07AM
7 0
profile picture
boppin
Posts: 111 - Karma: 308
Here is what you do OP

Get a Blank Deck, ex. minilogo.
Get trucks, dons't really matter ex. indys, thunders, ventures
Get cheap wheels, 52mm ex. bones 100's
Get Bones reds bearings.
Get cheapest hardware.
Get cheapest grip tape.
Apr 14 2015 2:32AM
5 0
profile picture
Sky.
Posts: 1158 - Karma: 287
Indie till I dy
Apr 14 2015 8:24AM
1 1
profile picture
Thom4s
Posts: 213 - Karma: 1,079
dingusWearing huf socks really help, the more pot leafs the better


When paired with a 5 panel or bucket hat your skate performance should increase exponentially.
Apr 14 2015 9:19AM
4 0
profile picture
Steezy_IN_KC
Posts: 2033 - Karma: 1,607
boppinHere is what you do OP

Get a Blank Deck, ex. minilogo.
Get trucks, dons't really matter ex. indys, thunders, ventures
Get cheap wheels, 52mm ex. bones 100's
Get Bones reds bearings.
Get cheapest hardware.
Get cheapest grip tape.


This is solid. Spend a little more on the bearings. Most shops will offer a customize your own board package. Most likely a "pick from this case" type deal. I would venture to say that with tax you're looking at 105 bucks.

They wheels on your current board look like cruisers almost. Tell them you want an 8.0 board... no more no less. Some sales people will try and talk you into a smaller size like a 7.75 to help learn more technical tricks (easier to flip) stick with the 8.0.
Apr 14 2015 11:23AM
0 0
profile picture
toastyteenagers
Posts: 1834 - Karma: 6,793
I buy shop decks and spray paint them.

Havent snapped, yet.
Apr 14 2015 11:43AM
0 5
profile picture
Slush
Posts: 1916 - Karma: 12,953
Thanks for the input guyz! Anyone know wtf this board is? Ever heard of this brand? It's a really nice board
Apr 14 2015 11:53AM
0 0
profile picture
Ghoster
Posts: 261 - Karma: 1,871
TwinipzThanks for the input guyz! Anyone know wtf this board is? Ever heard of this brand? It's a really nice board


Ooga booga Inc is a skateboard and rollerblade rental shop in California. My best guess is that it's a shop deck. It was probably an old rental that got bought or jacked. That would explain the big wheels; most people probably rented them to cruise around cali.
Apr 14 2015 12:25PM
2 0
profile picture
crotchvent
Posts: 1527 - Karma: 2,184
skatewarehouse.com is a very good spot to buy from can build your own complete. I recently got a slave deck with theeve trucks some bones wheels and reds bearings. I am enjoying it a lot so far.
Apr 14 2015 3:07PM
0 0
profile picture
Slush
Posts: 1916 - Karma: 12,953
GhosterOoga booga Inc is a skateboard and rollerblade rental shop in California. My best guess is that it's a shop deck. It was probably an old rental that got bought or jacked. That would explain the big wheels; most people probably rented them to cruise around cali.


Thank you for solving this mystery. I have been wondering for years where the thing came from
Apr 14 2015 3:52PM
0 0
profile picture
nutz.
Posts: 3150 - Karma: 6,712
I don't understand how you don't realize that your skateboard only rides like a dream because your wheels are bigger, wider, and softer.....

due to this fact, your board probably weighs quite a bit more than your friends no?
Apr 14 2015 3:54PM
1 1
profile picture
Slush
Posts: 1916 - Karma: 12,953
nutz.I don't understand how you don't realize that your skateboard only rides like a dream because your wheels are bigger, wider, and softer.....

due to this fact, your board probably weighs quite a bit more than your friends no?


Yeaaaa, I'm not very knowledgable about skateboards. Didn't really occur to me.

His board is a lot lighter. Also waaay popier
Apr 14 2015 4:13PM
0 0
profile picture
last_tango
Posts: 2635 - Karma: 2,665
TwinipzYeaaaa, I'm not very knowledgable about skateboards. Didn't really occur to me.

His board is a lot lighter. Also waaay popier

Your friends trucks might also be higher set which means you can press the tail down farther while olie'n.

I would take your board and try crazy ass tech slides.
https://www.newschoolers.com/videos/watch/766758/-HD--Earthwing-Technical-Slide-Jam-2011
Apr 14 2015 4:54PM
0 0
profile picture
mike759
Posts: 882 - Karma: 1,975
This seems like the right thread to ask this on:
Is 8.5" wide too much for size 13 shoe?
Apr 14 2015 5:47PM
0 0
profile picture
gengar.
Posts: 1042 - Karma: 1,641
mike759This seems like the right thread to ask this on:
Is 8.5" wide too much for size 13 shoe?


its all personal preference. Just ride whatever size feels the most comfortable for you
Apr 14 2015 6:08PM
1 0
profile picture
last_tango
Posts: 2635 - Karma: 2,665
mike759This seems like the right thread to ask this on:
Is 8.5" wide too much for size 13 shoe?

like said before preference. I have a USA 9.5 shoe size and ride a 8.5 wide. I suck at street tricks and just ride the bowl and pump around where a wide board feels nice to have.
Apr 14 2015 7:30PM
0 0
profile picture
mike759
Posts: 882 - Karma: 1,975
last_tangolike said before preference. I have a USA 9.5 shoe size and ride a 8.5 wide. I suck at street tricks and just ride the bowl and pump around where a wide board feels nice to have.


I use it the same way
Apr 14 2015 7:54PM
0 0
profile picture
Slush
Posts: 1916 - Karma: 12,953
last_tangolike said before preference. I have a USA 9.5 shoe size and ride a 8.5 wide. I suck at street tricks and just ride the bowl and pump around where a wide board feels nice to have.


Oh, that's right! Someone told me that skinny boards are for flip tricks and stuff, while wider ones are more for goin fast.

Just a question. Are there skinny boards with a big amount of concave? My friends board is nearly flat, and it's not as comfortable as my super concave board.
Apr 14 2015 10:27PM
0 0
profile picture
last_tango
Posts: 2635 - Karma: 2,665
TwinipzOh, that's right! Someone told me that skinny boards are for flip tricks and stuff, while wider ones are more for goin fast.

Just a question. Are there skinny boards with a big amount of concave? My friends board is nearly flat, and it's not as comfortable as my super concave board.

As far as flip tricks on a narrower board you can flip them with ease but its harder to land your feet on the board. I learned on a 7.25" and I could get dub shoves on rare occasion but I felt like I was riding a toothpick. Went to the 8.5" I have now and shoveting take more effort and I can't come close to dub shove anymore but it rides like a boat. I also feel more confidence on vert because there is more space to put my feet on the board and I feel more planted on the board.

I remember seeing a creature deck with a fuck ton of concave but it was a wide board built for vert. But in all honesty just buy a 8" or 8.25" wide blank. I was lucky enough to live about 20 minutes from where supreme was having their decks pressed and got a misprinted one for $10.
Apr 14 2015 10:57PM
0 0
profile picture
Thom4s
Posts: 213 - Karma: 1,079
last_tangoYour friends trucks might also be higher set which means you can press the tail down farther while olie'n.

I would take your board and try crazy ass tech slides.
https://www.newschoolers.com/videos/watch/766758/-HD--Earthwing-Technical-Slide-Jam-2011


Techsliding is some crazy shit. I've been to that spot before and some earthwing riders were just busting out 720s at like 20 mph. Plus with some new wheels his deck does look pretty good for it.
Apr 16 2015 9:27AM
1 0
profile picture
steezymcgeezy
Posts: 2 - Karma: 13
Honestly man I'd go for a whole new setup. I would highly recommend CCS to buy your board from, or even better your local skateshop. It looks to me like your board is pretty heavy, with the longboard wheels not helping. If you're trying to really pop some nice flip tricks then I would go for a deck around 7.75, depending on your side. 7.75 is nice because its skinny and can rotate much quicker than boards 8+. Then after that trucks and wheels aren't going to matter too much, but reds bearings are the way to go. Hope this helps
Apr 16 2015 4:32PM
1 0
All times are Eastern (-5)