Ski Edges

Gummy stone can be used to remove rust and polish edge. File and then gummy on the contact points for detuning

As stated above, gummy stone for polishing off the rust. If you want to sharpen your edges you can get files that are mounted on a jig that gives you the correct angle to sharpen your skis.

ok i underdtand but which file is good. And which jig or what ever its called.

Just ski, the rust will wipe off in a run.

https://www.newschoolers.com/videos/watch/739780/How-To--New-Ski-Tuning--amp--Base-Preparation-Part-1

http://www.evo.com/tools/dakine-edge-tuner-tool.aspx#image=83542/387646/dakine-edge-tuner-tool-green.jpg&select=true&utm_medium=shoppingengine&utm_source=googlebase&utm_campaign=EB-83542-1001

would this be fine to sharpen the skis up a bit or will it only take out burrs?

adrian191http://www.evo.com/tools/dakine-edge-tuner-tool.aspx#image=83542/387646/dakine-edge-tuner-tool-green.jpg&select=true&utm_medium=shoppingengine&utm_source=googlebase&utm_campaign=EB-83542-1001

would this be fine to sharpen the skis up a bit or will it only take out burrs?

Thats exactly what I was talking about!

TheWingmenThats exactly what I was talking about!

thanks bro. Im probably going to get this one http://www.evo.com/tools/swix-edge-sharpener.aspx#image=53933.Image.1.jpg&utm_medium=shoppingengine&utm_source=googlebase&utm_campaign=53933

but there 2 diffrent settings for edge and base which one should i use?

For park you want the highest degree bevel for both the base edge and the side edge. I'd look for a tool that you can get at least a 2, if not a 3 degree base edge.

Also vises will make sharpening much easier and way safer.

Ok I'll try to find one. But why should it be 2 or 3?

Think about it. A 0 degree bevel will put the edge exactly flat to the snow or rail, giving you excellent grip, but a much higher chance of catching an edge. Racers love this bevel as it gives you the most grip, but it is VERY unforgiving and touchy (not fun IMO). As you raise this bevel, it gives you a better mixture of grip while still having some forgiveness when it comes to catching an edge. This is super important on rails, unless you want to catch an edge on the first down rail of the season and smash your face ;).

It's kind of like the wheels of a longboard and sliding. When the wheels are new and the edges are crisp and hard (like a 0 degree bevel), it is much harder to slide but you have way more grip. As the edge gets worn down (like a 2 degree bevel), it is much easier and smoother to initiate the slide, but you sacrifice a bit of grip.

Ultimately the degree to which you choose is personal preference. I personally never sharpen my park skis, because I live on the west coast and don't have to deal with much ice and they slide perfectly on rails 100% of the time.

adrian191Ok I'll try to find one. But why should it be 2 or 3?

You need no more than 2 degrees of base bevel. That's like the most your going to get with a good guide such as this.

http://www.the-raceplace.com/Base-BEAST-p/3012z.htm


Combine with either a one or two degree side edge.

http://www.the-raceplace.com/Pocket-BEAST-p/3010z.htm

Learning to tune takes some time and dollars of investment, but if you plan on skiing for years it's well worth it to get the stuff and learn how.

Watch all my videos from above.

DominatorJacquesYou need no more than 2 degrees of base bevel. That's like the most your going to get with a good guide such as this.

http://www.the-raceplace.com/Base-BEAST-p/3012z.htm


Combine with either a one or two degree side edge.

http://www.the-raceplace.com/Pocket-BEAST-p/3010z.htm

Learning to tune takes some time and dollars of investment, but if you plan on skiing for years it's well worth it to get the stuff and learn how.

Watch all my videos from above.

yep, often times the standard is 1 degree. thats what i use and it works fine

Thanks everyone im probably going to get the one from swix that costs 20 and if i like tuning skis. Later ill buy some better gear.

One step at a time Adrian. That's it.