Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Binding position on skis

profile picture
white.powder
Posts: 187 - Karma: 777
Is it posible that my binding are not in the center of my skis(they are more at the back)? Do I have to re drill them?

*extra information: I started skiing last year so maybe the guy drilled them a little bit at the back for some reason...
Nov 7 2014 6:06PM
2 0
profile picture
S.J.W
Posts: 7609 - Karma: 31,186
Flip one of the skis upside down and the other the right way up and face them base to base. slide them down and if your toe piece on the upward facing ski touches the heal piece on the downward facing ski then your skis are truely centred.
Nov 7 2014 6:24PM
0 0
profile picture
O.Ps-Mom
Posts: 155 - Karma: 147
If they are an inch away from the tips you have a problem
Nov 7 2014 7:38PM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
If you just started skiing, it will likely be easier for you to master the basics with a traditional mount. Go center when you are consistently taking off and landing switch.
Nov 7 2014 7:46PM
2 0
profile picture
HuckNorris44
Posts: 1025 - Karma: 2,393
Measure the ski and take the total length and cut it in half. Mark that point somehow. Put your boot in the binding. See where the boot center line sits compared to the center mark you made. Its probably 4-7cm back from center. If you want them at ski center, you'll have to have them re-drilled.
Nov 8 2014 6:08PM
0 0
All times are Eastern (-5)