Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!
nine50sevenStill in the midst of this whole ordeal. Used the wrong jig on some bindings and the guy completely flipped out when i came out and told him that I drilled the wrong holes. Explained to him that skis can be mounted 3 times and he thought i was an idiot for thinking that. Wanted to get our look rep on the phone and bitch to them as well, Didnt really know what that was going to solve.
nine50sevenStill in the midst of this whole ordeal. Used the wrong jig on some bindings and the guy completely flipped out when i came out and told him that I drilled the wrong holes. Explained to him that skis can be mounted 3 times and he thought i was an idiot for thinking that. Wanted to get our look rep on the phone and bitch to them as well, Didnt really know what that was going to solve.
-SnowSnoli-I dont blame the guy for flipping out if you tried to use an excuse like oh but it can be mounted 3 times... That's not the guys problem.
Our shop bite the bullet with failed mounts, give the customer a new pair and shove rental bindings on the already drilled pair... Make more money on the ski over a season in rental than selling it anyway.
nine50sevenStill in the midst of this whole ordeal. Used the wrong jig on some bindings and the guy completely flipped out when i came out and told him that I drilled the wrong holes. Explained to him that skis can be mounted 3 times and he thought i was an idiot for thinking that. Wanted to get our look rep on the phone and bitch to them as well, Didnt really know what that was going to solve.
kalle.i work at a rental. there was this russian lady who came to rent boots and skis for the day. she was telling the info of her skiing abilities and then her husband came to her side and looked her straight to the eyes. she shut up and the guy started telling me the info. i found it amusing.
then at new years day a guy came to me. he had only one shoe, he looked like he's gonna burst in tears and he had a blanket from a ski restaurant on his shoulders and he asked me hung-over "do you happen to know where my shoe is? i really need it." and then he left and my co-worker said " it's fun to look at people who are suffering"
nine50sevenStill in the midst of this whole ordeal. Used the wrong jig on some bindings and the guy completely flipped out when i came out and told him that I drilled the wrong holes. Explained to him that skis can be mounted 3 times and he thought i was an idiot for thinking that. Wanted to get our look rep on the phone and bitch to them as well, Didnt really know what that was going to solve.
RubberSouli don't understand the hate on this post
sure, he made a dumb move by drilling incorrect holes in the ski. but isn't he correct that he can just have the shop redrill other holes and mount the bindings? why would the shop guy care if there are other holes (just plug them up)? i have a pair of skis that i had to mount up a little so as not to be too close to previous bindings' holes
tomPietrowskiIt's a tough one really. A mistake has been made and it is possible that the holes he drilled would mean the actual holes would not fit so the customer may be left having to change his mount position through no fault of his own. Mistakes happen we all make mistakes but you do have to own up to them and sometimes it will mean replacing product for a customer sometimes out of your own pocket.
future_spinI work at my local hill at the front desk and I had a lady come up to buy a candy bar or something. Instead of pulling money out of her pants, she pulled a soggy wet $10 bill out of her bra and paid with it.
NoSkillsCrewOther things:
We once had this texan lady come into the shop at Solitude all snow bunnied to the nines come in and ask us for our fastest skis. I suggested a good carving demo ski for her as she was a beginner / intermediate and she refused to take them saying that other skis we had were faster. After showing her nearly every ski in the shop and her turning them down the head of the rental department showed up and tried to help out. Finally after another thirty minutes of this our tuner comes out of the back with a fucked up old pair of shitty rental fleet skis that he had just spray painted flat red and was like "these are our custom race skis, they are the fastest we've ever seen." And she got super excited about them and finally got the fuck out of my shop.
Possibly the only time I have ever wanted to hit a customer in the face was when this couple came in out of the rain and I go to take their skis and do the customer service thing and be all nice. The wife pulls her iphone out of her pocket and asks "Hey can I dry this on you?" And before I could say fuck no and get out of the way she was using my shirt as a towel. And then just walked the fuck away. I wanted to murder her.
The most fucked up thing I have ever seen. Was one of my employees was helping this super fat dude out of a pair of ski boots. He was kneeling down and had his face pretty close to the boot while he was trying to pull it off. The customer for some reason instead of trying to pull his foot out kicked my employee in the face with pretty much all the force he could muster breaking his front tooth in half and making him bite through his upper lip. That was super fucked up.
As for dumb shit I had this one ski instructor always request that we use the ice skate sharpener to tune her skis because she was an ice skater. People will always come in from Little Cottonwood and un-ironically ask us for the "longest and stiffest" thing we have. Once had a dude come in with a delaminated base and ask us to "just you know fill it in." Most teenage kids don't seem to know how to tie their own shoelaces with snowboard boots. I can't tell you how many times a day I have to do that for them.
I'm sure I could think of more.
NoSkillsCrewThe most fucked up thing I have ever seen. Was one of my employees was helping this super fat dude out of a pair of ski boots. He was kneeling down and had his face pretty close to the boot while he was trying to pull it off. The customer for some reason instead of trying to pull his foot out kicked my employee in the face with pretty much all the force he could muster breaking his front tooth in half and making him bite through his upper lip. That was super fucked up.
KreechJesus that's absolutely retarded. Who the hell does that?
Anyway, at the shop I where I worked this past year we had an expedited mount fee (aka the christmas miracle fee) where customers could either pay $30 or buy the shop crew a pizza to have a mount done overnight. One time a woman came in to have 3 skis done with the expedite. We told her she could just pay one fee or just buy us one pizza because they were all system mounts and would have taken like 5 minutes, which she seemed super happy about. Around an hour or two goes bye and a pizza delivery guy comes in with 3 extra large pizzas and 3 boxes of bread sticks. It was enough for each floor of the shop to have a pizza and breadsticks and everyone ate dinner for free. It was fucking awesome. There are probably other things I could think of but it would just infuriate me to write them down because there was a lot of stupid shit that happened in the shop this year...
RubberSouli don't understand the hate on this post
sure, he made a dumb move by drilling incorrect holes in the ski. but isn't he correct that he can just have the shop redrill other holes and mount the bindings? why would the shop guy care if there are other holes (just plug them up)? i have a pair of skis that i had to mount up a little so as not to be too close to previous bindings' holes
tomPietrowskiIt's a tough one really. A mistake has been made and it is possible that the holes he drilled would mean the actual holes would not fit so the customer may be left having to change his mount position through no fault of his own. Mistakes happen we all make mistakes but you do have to own up to them and sometimes it will mean replacing product for a customer sometimes out of your own pocket.
SKI.INGShit man, in Tahoe that's the minimum for a regular mount. Express is like $50. And I've legit gone to a lot of local shops, not the rapey gaper ones.
GnarcoFirst, How do you use the wrong jig? I cant even think how this could happen. Second, id flip out on you to. I cant believe you didnt double check to make sure everything was set right before you drilled.
JibbaTheHuttso you know on the old A frames there was abit of foam that covered the two vents on the front? well i had a guy who said that one of these pieces of foam had fallen off so he had shoved snow in the gap to block it, he then didn't get why the goggles were misting up. As a result he claimed it was our fault that he nearly killed himself on the skiing down and that it was our obligation to pay for the new pair of goggles he had bought in resort at a much higher price. He also demanded that we pay him compensation to the value of his holiday that we had "ruined" by providing a vault product.
When i explained to him that the only thing we could possibly do was to send off his goggles to oakley and hope they'd do a warranty, he started getting aggressive, verbally abusing me and my colleagues. he was pretty much told to write to get out of the store, and that if he didn't like our service to write to head office.
LynxNationI always loved it when gapers told me their boots were tight and uncomfortable. It usually involved me untucking their thick jeans and taking a few layers of socks off.
NoSkillsCrewOther things:
We once had this texan lady come into the shop at Solitude all snow bunnied to the nines come in and ask us for our fastest skis. I suggested a good carving demo ski for her as she was a beginner / intermediate and she refused to take them saying that other skis we had were faster. After showing her nearly every ski in the shop and her turning them down the head of the rental department showed up and tried to help out. Finally after another thirty minutes of this our tuner comes out of the back with a fucked up old pair of shitty rental fleet skis that he had just spray painted flat red and was like "these are our custom race skis, they are the fastest we've ever seen." And she got super excited about them and finally got the fuck out of my shop.
Possibly the only time I have ever wanted to hit a customer in the face was when this couple came in out of the rain and I go to take their skis and do the customer service thing and be all nice. The wife pulls her iphone out of her pocket and asks "Hey can I dry this on you?" And before I could say fuck no and get out of the way she was using my shirt as a towel. And then just walked the fuck away. I wanted to murder her.
The most fucked up thing I have ever seen. Was one of my employees was helping this super fat dude out of a pair of ski boots. He was kneeling down and had his face pretty close to the boot while he was trying to pull it off. The customer for some reason instead of trying to pull his foot out kicked my employee in the face with pretty much all the force he could muster breaking his front tooth in half and making him bite through his upper lip. That was super fucked up.
As for dumb shit I had this one ski instructor always request that we use the ice skate sharpener to tune her skis because she was an ice skater. People will always come in from Little Cottonwood and un-ironically ask us for the "longest and stiffest" thing we have. Once had a dude come in with a delaminated base and ask us to "just you know fill it in." Most teenage kids don't seem to know how to tie their own shoelaces with snowboard boots. I can't tell you how many times a day I have to do that for them.
I'm sure I could think of more.
nine50sevenYeah i had to pay out of my broke ass pocket for them. powertrack 89 were the skis. I was in a hurry to which should have never happened. well im sure it wont happen again because im super cautious now. I know it was stupid i was so pissed of at myself.
nine50sevenStill in the midst of this whole ordeal. Used the wrong jig on some bindings and the guy completely flipped out when i came out and told him that I drilled the wrong holes. Explained to him that skis can be mounted 3 times and he thought i was an idiot for thinking that. Wanted to get our look rep on the phone and bitch to them as well, Didnt really know what that was going to solve.
GnarcoFirst, How do you use the wrong jig? I cant even think how this could happen. Second, id flip out on you to. I cant believe you didnt double check to make sure everything was set right before you drilled.
tomPietrowskiIt's a tough one really. A mistake has been made and it is possible that the holes he drilled would mean the actual holes would not fit so the customer may be left having to change his mount position through no fault of his own. Mistakes happen we all make mistakes but you do have to own up to them and sometimes it will mean replacing product for a customer sometimes out of your own pocket.
future_spinI work at my local hill at the front desk and I had a lady come up to buy a candy bar or something. Instead of pulling money out of her pants, she pulled a soggy wet $10 bill out of her bra and paid with it.
413CrewLast season i asked for new bindings from my local shop. Asked what they had for a lightweight freestyle binding, He gave me what i thought was a "good deal", about halfway through the season i fell off a rail and the binding ripped out of my ski and never released properly and i ended up breaking my foot. Did some research, turns out they gave me a binding for a 7year old kid . fuck you comp edge ski shop