Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Cutting poles

profile picture
-RB-
Posts: 1225 - Karma: 939
Does anyone have any experience with cutting poles to shorten them up? How did you get the grip off? No wrong answers, thanks.
Oct 26 2014 7:52PM
4 1
profile picture
qc_riders
Posts: 103 - Karma: 193
just takes ouf he grip with your hands... its diffecult put it will maybe work
Oct 26 2014 7:54PM
0 0
profile picture
-RB-
Posts: 1225 - Karma: 939
qc_ridersjust takes ouf he grip with your hands... its diffecult put it will maybe work


I tried, wouldn't come off
Oct 26 2014 8:02PM
0 0
profile picture
gnar_whal
Posts: 1286 - Karma: 3,787
put the grip in hot water for a few minutes then try
Oct 26 2014 8:20PM
0 0
profile picture
stupendous-man
Posts: 8637 - Karma: 13,293
cut them below the grips and put bike grips on instead. pole straps are overrated.

or put them in a vice and use channel locks to twist the grips off. cannot guarantee you wont crush your pole (ouch) using this method.
Oct 26 2014 8:20PM
2 1
profile picture
-RB-
Posts: 1225 - Karma: 939
stupendous-mancut them below the grips and put bike grips on instead. pole straps are overrated.

or put them in a vice and use channel locks to twist the grips off. cannot guarantee you wont crush your pole (ouch) using this method.


I was really considering going the bike grip path, I'll look around for some that would fit, thanks!
Oct 26 2014 8:23PM
0 0
profile picture
-RB-
Posts: 1225 - Karma: 939
stupendous-mancut them below the grips and put bike grips on instead. pole straps are overrated.

or put them in a vice and use channel locks to twist the grips off. cannot guarantee you wont crush your pole (ouch) using this method.


I was really considering going the bike grip path, I'll look around for some that would fit, thanks!
Oct 26 2014 8:23PM
0 0
profile picture
~~~~~~~~
Posts: 2345 - Karma: 2,104
You need to heat them with either a heat gun or a pot of hot water to get them off.
Oct 26 2014 8:33PM
0 0
profile picture
stupendous-man
Posts: 8637 - Karma: 13,293
~~~~~~~~You need to heat them with either a heat gun or a pot of hot water to get them off.


shit i forgot about this. it really does work, just heat a big pot of water and leave the pole grips in there for 10-15 minutes and they will come off easily.
Oct 26 2014 8:36PM
0 0
profile picture
shin-bang
Posts: 4100 - Karma: 6,997
i used to be in your situation. what works the best is if you get a hot bucket of water( as hot as it will come out of your tap) and let the grips sit in there for 2 to 3 minutes. youll see a white substance start to disperse through the water. that is the glue warming up and coming off. after about 3 minutes, youll be able to slide the grips off fairly easily. and when youre putting the grips back on they usually dont need glue unless its a loose fit. ive used mine for a while without gluing them back on and have had no issues.
Oct 26 2014 9:37PM
0 0
profile picture
-RB-
Posts: 1225 - Karma: 939
a_shaky_gifi used to be in your situation. what works the best is if you get a hot bucket of water( as hot as it will come out of your tap) and let the grips sit in there for 2 to 3 minutes. youll see a white substance start to disperse through the water. that is the glue warming up and coming off. after about 3 minutes, youll be able to slide the grips off fairly easily. and when youre putting the grips back on they usually dont need glue unless its a loose fit. ive used mine for a while without gluing them back on and have had no issues.

Word, Thanks! +k to all who contributed
Oct 26 2014 9:45PM
0 0
profile picture
DrZoidberg
Posts: 5675 - Karma: 4,268
Here's how I did bike grips. I have skinny composite poles. So I put some rather papery, porous tape around the pole, saturated it with epoxy, then put the grip over that. Tape it at such a diameter that it's a tight fit, and the resin will ensure it stays on.



Oct 26 2014 10:18PM
0 0
profile picture
DrZoidberg
Posts: 5675 - Karma: 4,268
And apparently the images didn't work.
Oct 26 2014 10:19PM
0 0
profile picture
Just_Huck_1t
Posts: 42 - Karma: 19
Boil some water and hold the grips in there for about a minute should slide off easily, but make sure there isn't a screw holding your grips on. Use a hack saw to cut them, putting the grips on might be hard so you might have to heat them up again to get them on all the way. Good Luck
Oct 26 2014 10:28PM
0 0
profile picture
Laurent.
Posts: 10056 - Karma: 25,313
Getting grips off: Heat gun, sister's hairdryer, pot of boiling water, vice, Black & Dekker Workmate, etc...

Chopping off excess pole length: pipe cutter (clean and perfectly straight), hacksaw, angle grinder, mitre saw, plasma cutter, lathe, etc...

It's not hard.
Oct 27 2014 7:59AM
0 0
All times are Eastern (-5)