Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Mounting My Own Skis

profile picture
KelBarbs
Posts: 84 - Karma: 36
Searchbar didn't satisfy me.

Got a pair of skis already drilled for the bindings I have, can I just mount them up myself? Should I just put some wood glue in the holes and use a screwdriver to tighten them up. Seems like a huge waste of time and money to pay someone to do exactly that...
Oct 24 2014 4:36PM
4 1
profile picture
a_burger
Posts: 5235 - Karma: 20,715
if the holes are already there, your good. Just make sure the screws aren't too long and that you go slowly with it. Also for glue/epoxy I would use something that you can still get out later on if you want to change bindings.
Oct 24 2014 5:03PM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
The shop will also check to make sure your boot releases with the right amount of force, which will also test the binding/ski connection. They're your ACL's, so however much you trust your work. If the screw spins, you overtightened and its fucked.
Oct 24 2014 6:30PM
0 0
profile picture
Blurst
Posts: 13577 - Karma: 10,169
Just drill em in there
Oct 24 2014 6:39PM
0 0
profile picture
Caucasian_Asian
Posts: 2447 - Karma: 1,665
If you have to ask how much a Ferrari costs, you can't afford one.


If you have to ask if you can mount your own bindings, you can't.
Oct 25 2014 10:37PM
2 1
profile picture
Poikenz
Posts: 1478 - Karma: 3,762
RudyGarmischThe shop will also check to make sure your boot releases with the right amount of force, which will also test the binding/ski connection. They're your ACL's, so however much you trust your work. If the screw spins, you overtightened and its fucked.


I would say it depends on where you live and which shop you go to as I doubt most places care enough to actually purchase that machine. Hell I've been to places that can't even set your forward pressure properly.
Oct 25 2014 11:03PM
0 0
profile picture
shin-bang
Posts: 4100 - Karma: 6,997
PoikenzI would say it depends on where you live and which shop you go to as I doubt most places care enough to actually purchase that machine. Hell I've been to places that can't even set your forward pressure properly.


^thats the definition of my local shop... cough cough barries ski and sports cough
Oct 25 2014 11:31PM
0 0
profile picture
remove
Posts: 2566 - Karma: 1,026
RudyGarmischThe shop will also check to make sure your boot releases with the right amount of force, which will also test the binding/ski connection. They're your ACL's, so however much you trust your work. If the screw spins, you overtightened and its fucked.


and there's the possibility of your binding yanking out.
Oct 27 2014 4:32PM
0 0
profile picture
.squirrely.
Posts: 7563 - Karma: 7,546
if the holes are already there you can just use nails
Oct 27 2014 4:33PM
0 0
profile picture
tydan
Posts: 276 - Karma: 78
.squirrely.if the holes are already there you can just use nails


Don't got a hammer or nails, liquid nails
Oct 27 2014 7:39PM
0 0
profile picture
gnarballsianm
Posts: 621 - Karma: 703
RudyGarmischThe shop will also check to make sure your boot releases with the right amount of force, which will also test the binding/ski connection. They're your ACL's, so however much you trust your work. If the screw spins, you overtightened and its fucked.


This is too true, I agree completely with your idea of saving a couple extra bucks, but unless you fully know what you are doing/ you have guidance, then it ain't smart to do it yourself. Fuckin up your ski season on the first couple of days by tearing an acl or likewise is shitty no matter how ya dice it. Play it smart and take it in to a shop man. Rudy's name is rad by the way, gotta love the "hot dog" references!
Oct 27 2014 9:40PM
0 0
All times are Eastern (-5)