Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Anyone on 4frnt attack 13s +k for help

profile picture
cbgski
Posts: 90 - Karma: 652
Just wondering, I got my bindings shipped to me but when they arived here the brakes were advertised for 88 and my skis are 85 and the brakes just did not fit on. The brake has this kink on both sides right next to the plastic which sticks down about 3mm below the plastic part of the brake This makes it that if I want to bend them I would have to bend it a long ways, or i would have to put a riser under them but thats one of the reasons i got these bindings, because they have no riser. When I looked on google images all other pictures of the brakes show no kink like mine, just curved.

Anyways I was wondering if anyone has these bindings and if you do are your brakes just curved or do they also have this kink in them, because i think that they shipped me the wrong brakes but when I called them they were convinced that they were right and I just didnt know what I was talking about.

++k For any help guys thanks
Oct 12 2014 12:13PM
1 0
profile picture
Al.Capone
Posts: 661 - Karma: 2,779
Could you post a picture? Also inb4 tom.
Oct 12 2014 12:47PM
0 0
profile picture
tomPietrowski
Posts: 7145 - Karma: 17,457
Th brakes are pretty tight on the attack. You can just get some 97mm brakes and they will be fine. Or if tey nearly fit we have cut the plastic on the arm to make them fit better. What I would do I take them to get mounted and have the tech see if they fit once mounted. If not hopefully the hop may agree to swap your brakes for free.
Oct 12 2014 8:24PM
1 0
profile picture
cydwhit
Posts: 5070 - Karma: 43,007
tomPietrowskiTh brakes are pretty tight on the attack. You can just get some 97mm brakes and they will be fine. Or if tey nearly fit we have cut the plastic on the arm to make them fit better. What I would do I take them to get mounted and have the tech see if they fit once mounted. If not hopefully the hop may agree to swap your brakes for free.


Yeah, the brakes are definitely tight, I got the 115's and I am going to have to bend them to put them on my Shreditor 112's
Oct 12 2014 8:41PM
0 0
profile picture
cbgski
Posts: 90 - Karma: 652
All right thanks I will see if I can get them replaced
Oct 13 2014 9:43AM
0 0
profile picture
CGehrig
Posts: 73 - Karma: 18
cbgskiAll right thanks I will see if I can get them replaced


You can always bend them a little bit if they are real close to fitting
Oct 13 2014 10:36AM
0 0
All times are Eastern (-5)