Member of the Month

theabortionator
April, 2025

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Park ski edge tuning

profile picture
gameover2299
Posts: 26 - Karma: 71
My ski edges have been getting a little chopped up and need to be tuned/detuned again and recommendations on how you guys tune park skis that also allow versatility outside park? and how do you guys tune your skis? i last tuned them with a 3 degree edge on the tip and tail and let the edge underfoot roll over.
11 years ago
1 0
profile picture
a_burger
Posts: 5257 - Karma: 21,143
I always do a 90 edge at the contact points and then generally leave underfoot detuned unless there are burrs or something that needs to be fixed
11 years ago
0 0
profile picture
BWalmer
Posts: 9141 - Karma: 12,886
0 or 1 degree on tip/tail, underfoot gets a gummy stone, rocker contact point also gets a gummy stone (obviously only if the skis are rockered)
11 years ago
0 0
profile picture
tomPietrowski
Posts: 7290 - Karma: 18,698
For park if your doing quite a lot of rail stuff going for a larger angle on the base edge can work well. It can prevent edge catches but still allow for a sharp edge for jumps. So instea of using a 1degree angle maybe try a 1.5 or even 2. You can offset the edge angle to maintain 90 so use 88.5 or 88 or try a 89 and see how you like it. From there I would use a file to detuning the contact point and underfoot. You can use a gummy but it take longer and your going to clean the edge after anyways. After filing use a gummy to clean any excess metal and then a polish with wet dry paper can really finish the edges nicely.
11 years ago
2 0
All times are Eastern (-4); Currently it's 12:37PM