Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Rusting edges

profile picture
qmack
Posts: 109 - Karma: 1,027
hey ns,

i recently got a summer setup in my backyard and after 1 week of use , my edges are starting to rust..

what should i do to fix them? file/rock ?? and how can i prevent this in the future . thanks

k+
Aug 30 2014 7:49PM
6 0
profile picture
.FRY.
Posts: 5620 - Karma: 22,861
please change your icon


also edges rust. the rust will come off eventually. no big deal.
Aug 30 2014 7:51PM
1 0
profile picture
Park_Mho
Posts: 351 - Karma: 390
I just use a soft gummy stone to remove rust. I have never used the hard ones for removing rust, but the soft ones like this:


Work really well for me. Try it out
Aug 30 2014 7:54PM
1 0
profile picture
qmack
Posts: 109 - Karma: 1,027
MhoP_I just use a soft gummy stone to remove rust. I have never used the hard ones for removing rust, but the soft ones like this:


Work really well for me. Try it out


alright ill give it a try
Aug 30 2014 8:02PM
0 0
profile picture
toastyteenagers
Posts: 1834 - Karma: 6,793
rust will eventually come off, or use some of that gummy stuff
Aug 30 2014 9:53PM
0 0
profile picture
PacificRimJob
Posts: 24725 - Karma: 29,944
Ski on them.

Or use a gummi if you really care. Park skis don't really need to be razorblades most of the time.
Aug 31 2014 6:48PM
0 0
profile picture
casual
Posts: 6712 - Karma: 6,748
Literally makes no difference and is typical especially when you don't wipe your skis down after riding, or at the end of the year. It's not permanent, it's a super thin little layer that comes off with a quick tune, a gummy, and even regular skiing will take it off. Don't trip my dude, and summer shred on.
Aug 31 2014 7:06PM
0 0
profile picture
shitpoop
Posts: 667 - Karma: 1,479
wipe em down, keep em in a dry room. also, a lil wax coating (just rub it on) doesnt take that long and goes a long way to help
Aug 31 2014 7:09PM
0 0
profile picture
omIV
Posts: 1950 - Karma: 306
Strictly speaking you should run a stone along your edges after use. If for whatever reason you care about keeping your edge bevel intact, use a file guide. A gummy stone is fine - just keep in mind that they dull your edges. If you want to maintain the edge, use a fine diamond stone or ceramic file just to polish. Wax is always good for maintaining your bases. Not sure how helpful it will be on edges, however.. it will come off pretty quickly.
Aug 31 2014 7:18PM
0 0
profile picture
shitpoop
Posts: 667 - Karma: 1,479
I mean wax after using your skis. it will prevent it being in contact with the air, hence no rustings
Sep 3 2014 8:59PM
0 0
profile picture
JGWI
Posts: 2842 - Karma: 7,812
Like has been said, it will come off with use but if you really want to get rid of it then use a gummy stone or one of those fine sand paper blocks. Also make sure you dry your skis if they get wet when you put them away.
Sep 3 2014 9:07PM
0 0
All times are Eastern (-5)