Member of the Month

partyandBS
December, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Quick question about moving a binding

profile picture
qmack
Posts: 109 - Karma: 1,027
Last christmas my dad wanted to suprise me with a new pair of skis and bindings. I didnt know about it until christmas day .

So I found out when he took them to the shop to get the bindings put on, they asked if he would like to have the bindings 2cm behind from centre, being a non-skiing dad he just went ahead with it as it was a suprise so he couldnt ask me.

Anyway, is it possible to move the binding back to centre and drill new holes or will is destroy the ski?

Thanks :-)
Aug 18 2014 3:23PM
5 0
profile picture
shin-bang
Posts: 4103 - Karma: 7,001
yes you will be fine, they will just take of the binding and mount it dead center if thats where you want it( yes they will have to drill new holes). they will also fill the old holes so water wont get into your core. they should be just fine!
Aug 18 2014 3:29PM
0 0
profile picture
Casey
Posts: 7891 - Karma: 24,960
Maybe you should try them out before you redrill. If its only 2 cm difference I don't think its really worth it
Aug 18 2014 3:34PM
1 0
profile picture
qmack
Posts: 109 - Karma: 1,027
CaseyMaybe you should try them out before you redrill. If its only 2 cm difference I don't think its really worth it


Well I rode them this season but I dont know If ill change it because I was just wondering if it was even possible
Aug 18 2014 3:51PM
0 0
profile picture
.lencon
Posts: 6753 - Karma: 17,191
Did you not like how they skied?
Aug 18 2014 4:40PM
0 0
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
It's possible. Will you notice the difference? Probably not.
Aug 18 2014 6:31PM
1 0
profile picture
skier58284
Posts: 1705 - Karma: 5,366
It will definitely work, a ski can be redrilled a few times, but don't try it yourself if you don't know what you're doing, have a tech do it. If you want them mounted at a specific location (i.e. true center or whatever), measure yourself before taking them to the shop, that way you make sure they get it right this time. Redrilling once is fine, twice is probably okay, but especially being a second drilling you want to make sure you get it right.

To people saying you won't notice the difference, I disagree, I had a pair of bindings moved 2cm forward and noticed a big difference. Depends on the person I guess.
Aug 18 2014 6:39PM
0 0
profile picture
Negromancer
Posts: 1014 - Karma: 1,499
What skis are they exactly? If they're non-symmetrical then I would say just try skiing at 2cm see if you notice a difference. If they're symmetrical then definitely remount them to centre. Remounting them shouldn't cause any issues just make sure you get it done by a good dedicated ski shop. Remounting skis only really becomes and issue when you mount them more than 3 times.
Aug 18 2014 10:56PM
0 0
profile picture
qmack
Posts: 109 - Karma: 1,027
NegromancerWhat skis are they exactly? If they're non-symmetrical then I would say just try skiing at 2cm see if you notice a difference. If they're symmetrical then definitely remount them to centre. Remounting them shouldn't cause any issues just make sure you get it done by a good dedicated ski shop. Remounting skis only really becomes and issue when you mount them more than 3 times.


k2 domains 2013 and marker squire bindings
Aug 19 2014 9:22AM
0 0
profile picture
LC.
Posts: 5952 - Karma: 2,423
qmackk2 domains 2013 and marker squire bindings


Marker's toe mount is 30mm long, so go +15mm (5mm back of centre); +20mm would be borderline sketchy. Tell your shop to drill the new toe holes for optimal spacing between the old ones, that's the most important thing.
Aug 19 2014 12:41PM
0 0
All times are Eastern (-5)