Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Loop Rail at B&E Invitational Conspiracy to Murder?

profile picture
VCM
Posts: 17 - Karma: 485
By the looks of the rail it pretty much looks impossible. We've seen comepletely square rails and shit from Travelling circus but what the fuck your pretty much going completely upside down with this shit. Please tell me how a person is supposed to survive doing this. This comes to my conclusion that this is a conspiracy to murder by Henny and Phil.
Mar 30 2014 1:40PM
402 28
profile picture
Drail
Posts: 14012 - Karma: 10,010
Not upside down - unless someone actually attempts to slide the inside. Look at it again, but with someone sliding on top of the rail, not inside it.
Mar 30 2014 2:31PM
4 4
profile picture
theabortionator
Posts: 51585 - Karma: 161,685
Inside or bust
Mar 30 2014 2:36PM
47 0
profile picture
VCM
Posts: 17 - Karma: 485
Is it possible to do either? if your gunna do the rail on the top side your momentum on the way up is gunna keep carrying you i dont think you will be able to slide the whole rail on top, unless your planning just to launch yourself off the up
Mar 30 2014 2:36PM
2 0
profile picture
Drail
Posts: 14012 - Karma: 10,010
With that logic all rainbow rails would just launch you. It's just a rainbow rail with a curve to it. Think of it as a rainbow s rail.
Mar 30 2014 2:45PM
19 2
profile picture
nutz.
Posts: 3150 - Karma: 6,712
With the right amount of speed, I'm sure it's possible.... Drail's right. Your logic is flawed
Mar 30 2014 2:48PM
5 2
profile picture
theTRIBE101
Posts: 1175 - Karma: 856
can anyone post a picture for discussion?
Mar 30 2014 2:48PM
7 0
profile picture
VCM
Posts: 17 - Karma: 485
Not really... most rainbow rails arent a 90 degree slope
Mar 30 2014 2:55PM
3 0
profile picture
VCM
Posts: 17 - Karma: 485
Click for larger image

Mar 30 2014 2:57PM
36 0
profile picture
mski
Posts: 4791 - Karma: 3,803
Sliding the top is a cop out
Mar 30 2014 3:18PM
41 0
profile picture
JAHBRADOR
Posts: 3003 - Karma: 17,009
But like, think, if you get it anything but perfect you are gonna be going straight from the top of the rail to flat...
Mar 30 2014 3:22PM
1 0
profile picture
VCM
Posts: 17 - Karma: 485
yeah like i dont see how you can change from going 90 degree upwards to 90 degree downwards
Mar 30 2014 3:24PM
1 1
profile picture
nutz.
Posts: 3150 - Karma: 6,712
How do people hit wallrides then?
Mar 30 2014 3:28PM
1 2
profile picture
EvanMeyer
Posts: 3820 - Karma: 3,443
You're thinking about it way too much, its really not that complicated.
Mar 30 2014 3:29PM
0 0
profile picture
theabortionator
Posts: 51585 - Karma: 161,685
Jesus. It's round too so they can hit it at any angle depending on speed. They could slide with just enough speed to get over the top and then turn in for the down with the second c. Al
Mar 30 2014 3:34PM
3 1
profile picture
gotti
Posts: 4269 - Karma: 4,550
bust inside
Mar 30 2014 3:37PM
48 0
profile picture
mvf
Posts: 786 - Karma: 1,581
I could see someone sliding the inside, then doing a switch up to the other side.

Possible?
Mar 30 2014 4:17PM
2 0
profile picture
fghtoffyrdmns
Posts: 2998 - Karma: 6,866
the easiest way to do it would be to front swap....fuck that
Mar 30 2014 4:34PM
0 0
profile picture
corona
Posts: 12794 - Karma: 32,716
no way someone could grease the whole thing. that's crazy.
Mar 30 2014 5:14PM
7 0
profile picture
S.J.W
Posts: 7609 - Karma: 31,185
It'll probably be smaller when put into the course
Mar 30 2014 5:29PM
1 1
profile picture
edai
Posts: 4987 - Karma: 4,653
1. Inside front swap to inside
2. Stall on top round part
3. Slide top round part

Thats assuming theres like like basically everywhere around it.
Mar 30 2014 5:35PM
0 0
profile picture
BROLF
Posts: 1598 - Karma: 5,098
you're not very smart.... they get just enough speed to get to the top, ride over the top, and down the other side. Why is that so hard to understand? it will be hard to do but possible
Mar 30 2014 5:44PM
0 1
profile picture
Elg
Posts: 2998 - Karma: 3,880
i'm predicting someone will slide the up-part and then do an inside transfer to the down-part, under the top.
Mar 30 2014 6:17PM
10 0
profile picture
JDA
Posts: 572 - Karma: 566
There is only one man for the job... Candide!!!
Mar 30 2014 6:30PM
12 0
profile picture
galardogod
Posts: 1698 - Karma: 5,209
This is what i thought of after 30 minutes of examining it
Mar 30 2014 7:55PM
1 0
profile picture
AlexFromTarget
Posts: 533 - Karma: 59
Someone is going to slide the whole rail and do the full loop
Mar 30 2014 8:03PM
3 0
profile picture
milk_man
Posts: 5252 - Karma: 5,980
The part where the person would potentially go upside down is too short. It would have to be more of a loop, a wider loop, for it to be possible. People will just transfer from the up to down.


Unless Delorme is invited, because the laws of gravity don't affect him
Mar 30 2014 10:21PM
16 0
profile picture
louie.mirags
Posts: 6015 - Karma: 5,029
qfe.. usually comes down to this
Mar 30 2014 10:29PM
0 0
profile picture
hoodcrew
Posts: 1002 - Karma: 69,638
I think this is pretty possible, regardless this shit is gonna be epic!
Mar 30 2014 11:20PM
12 0
profile picture
Toaster-Tony
Posts: 3531 - Karma: 5,850
This is what I came up with too. This thing is about to get slayed.
Mar 30 2014 11:25PM
1 0
profile picture
yung_stone
Posts: 203 - Karma: -62
why wasn't Wu-Tang invited
Mar 31 2014 12:19AM
4 3
profile picture
NinetyFour
Posts: 8650 - Karma: 13,409
http://www.youtube.com/watch?v=BSbfTtCGt9Y&app=desktop

Can't copy the embed code properly. From what I understand though there will be a snow wedge under the last 40% of the rail so that this thing isn't completely suicidal. It's still insane though, hope someone clears it upsidedown.
Mar 31 2014 12:37AM
0 0
profile picture
Atay322_VC
Posts: 52 - Karma: 133
Definetley possible.
Mar 31 2014 1:05AM
0 0
profile picture
FunkySane
Posts: 616 - Karma: 1,203
My brain is just killing me right now.
Mar 31 2014 2:12AM
0 0
profile picture
Alex_G
Posts: 11902 - Karma: 1,019
somebody gon die
Mar 31 2014 2:47AM
0 0
profile picture
future-spins
Posts: 395 - Karma: 900
My inner Darwin says fantastic
Mar 31 2014 9:36AM
5 0
profile picture
XtRemE11
Posts: 5680 - Karma: 246
when he starts taking that massive rail straight on, everything else will seem to just stop.
Mar 31 2014 11:34AM
1 0
profile picture
NinetyFour
Posts: 8650 - Karma: 13,409
Click for larger image

Another angle. From here it looks way harder to take that shit over the top. I could see someone riding it up and then transferring to the down without clearing the entire thing though. To actually loop it though, god damn, it's a really tight radius at the end.
Apr 4 2014 8:17PM
7 0
profile picture
Turd.Ferguson
Posts: 1437 - Karma: 2,713
yeah no way if someone slays that whole thing that would be insane as hell its way too tight and you need to be able to maintain your speed trough the loop or your going to fall on your head. if anyone lands it i was gonna say jossi but hes too busy zero spinning and riding motor cycles so i think ahmet dadali is gonna stomp it
Apr 4 2014 8:47PM
4 0
profile picture
Peachbutt
Posts: 623 - Karma: 601
Maybe just me but this looks way beyond anyone's skill level
Apr 5 2014 2:04AM
4 2
profile picture
RudyGarmisch
Posts: 25443 - Karma: 13,844
Someone will eventually do it.
Apr 5 2014 2:12AM
3 1
profile picture
UFOsarereal
Posts: 2285 - Karma: 1,132
Ahmet will kill that thing
Apr 5 2014 3:36AM
1 1
profile picture
anti_bunk
Posts: 2629 - Karma: 329
That shits impossible. 
Apr 5 2014 8:32AM
0 0
profile picture
TomWallnuss
Posts: 115 - Karma: 417
Phil´s magical S-rail skills will help him survive this, calling it now he´s going to make it tips inside sitting on his heels
Apr 5 2014 9:03AM
1 0
profile picture
304NordMan
Posts: 2983 - Karma: 525
the way they buried a third of the rail in the landing makes it look sort of stupid; little time to do anything to exit and also you can't really grind the down part
Apr 5 2014 11:52AM
0 0
profile picture
Turkelton
Posts: 2829 - Karma: 8,558
Apr 5 2014 12:00PM
9 0
profile picture
lalchimyk
Posts: 77 - Karma: 1
Will be a the B&E tomorrow, so I will confirm you if it's done or not ! :)
Apr 5 2014 3:27PM
3 0
profile picture
NinetyFour
Posts: 8650 - Karma: 13,409
Click for larger image

I don't think Phil went around though.

http://freeski.downdays.eu/news/05/04/2014/be-inventational-freedom-of-a-first-day-3/

Link to more photos though.
Apr 5 2014 7:33PM
6 0
profile picture
ChipDirt
Posts: 54 - Karma: 54
someone will try it. and it will be insane
Apr 5 2014 8:10PM
0 0
profile picture
El.
Posts: 221 - Karma: 845
Seeing this picture made me realize that its a lot bigger than it looks in the other photos. If someone tries to go around i think that the problem wont be that the end is to tight but that the beginning doesnt curve hard enough to stay on the rail
Apr 5 2014 8:27PM
0 0
All times are Eastern (-5)