Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Edge coming out of ski

profile picture
caelan_
Posts: 40 - Karma: 117
I have a pair of K2 iron maidens and the edge at the tail is coming out.

Any tips on putting it back in? +k for reasonable answers
Feb 22 2014 8:18PM
7 0
profile picture
chuckmarty
Posts: 344 - Karma: 448
epoxy and rivets
Feb 22 2014 9:40PM
0 0
profile picture
elcornholio
Posts: 797 - Karma: 1,556
Fill crack of ski with epoxi, put edge in place and use clamps to hold it tightly together. now wipe off extra epoxi and wait til it dries. Now, use a file to grind the edge to be flush with the base/other edge and take off any extra epoxi. good luck and hope this helps. If all else fails, seek a warranty on the skis. there can be a good chance depending on the brand and how old the skis are.
Feb 22 2014 9:58PM
3 0
profile picture
Substitute
Posts: 1376 - Karma: 2,275
High speed grinder with a cut off wheel. Cut edge where it connects firmly with the ski. Epoxy shit back together.

Or listen to them.
Feb 22 2014 10:16PM
0 0
profile picture
lewist
Posts: 174 - Karma: 799
Do this before you start using epoxy and rivets...
Feb 23 2014 6:34AM
0 0
profile picture
Substitute
Posts: 1376 - Karma: 2,275
Yeah. They wont warranty a ski with a bunch of holes in it.
Feb 23 2014 7:42AM
0 0
profile picture
Caucasian_Asian
Posts: 2447 - Karma: 1,665
Are your skis covered by warranty still?
Feb 23 2014 8:45AM
0 0
All times are Eastern (-5)