Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Fks 18 mounting question

profile picture
LolklonVolkls
Posts: 228 - Karma: 622
Are the bolt patterns on the 14 and 18 the same? Just got a pair of 18s and i wanna put them on a pair of RMUs that have 14s on them, i was wondering if remounting them would be any problem, if i could use the same holes, or will they need to be redrilled. Also they are mounted center currently and i was wondering if this would pose any problems mounting them center again, for the same boot size, just with the 18s instead. +k for actual help
Dec 3 2013 1:39PM
1 0
profile picture
KyleA
Posts: 865 - Karma: 510
The hole pattern is the same for the 14 and 18.  Remounting in existing holes is a personal preference.  If holes are in good shape and not stripped, and the new screws bite, you should be fine. 
Dec 3 2013 1:47PM
0 0
profile picture
DowseBigamy
Posts: 113 - Karma: 147
So long as the mounting points are the same, it won't be a problem. If you're really worried about the screws lifting, then helicoils will do the trick. Putting them in anyway, just in case, wouldn't hurt.
Dec 3 2013 3:07PM
0 0
profile picture
LolklonVolkls
Posts: 228 - Karma: 622
thanks guys

Dec 3 2013 4:37PM
0 0
profile picture
Huck_Norris
Posts: 11487 - Karma: 18,627
If you're using the same holes, always use at least helicoils, or if you're that kind of guy go for inserts and swap to machine screws.
Dec 3 2013 4:51PM
0 0
profile picture
Blake.P
Posts: 9894 - Karma: 3,585
Get inserts. That way if you ever try to replace the brake in the fks, you can easily remove the heel without damaging the ski. Plus inserts probably will hold better than helicoils
Dec 3 2013 4:56PM
0 0
All times are Eastern (-5)