Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Question For The COMPUTER SAVVY

profile picture
bigbromskier
Posts: 1175 - Karma: 330
So basically my hard drive broke, or rather the connection between the USB port and the power connection motherboard thing that connects to the actual hard drive is broken. In the picture below you can see the ten prongs that were connected to the motherboard thing whose solder came loose from the circuit thing seen above--I can hold it against it and I know it works cause it makes the hard drive start spinning and I've even gotten some stuff off of it. But obviously I want a permanent connection again.

Is this an easy fix like I'm thinking it is given the right skills/supplies? Thanks!

Click for larger image
Nov 19 2013 6:52PM
36 3
profile picture
Phil-X-
Posts: 7205 - Karma: 14,399
Have you tried turning it off and then back on again?
Nov 19 2013 6:54PM
11 0
profile picture
J_BISCHOF
Posts: 2082 - Karma: 1,449
what about unplugging it and plugging it back in?
Nov 19 2013 6:55PM
2 0
profile picture
gotti
Posts: 4269 - Karma: 4,550
Unplug your router for 30 seconds then try again.
Nov 19 2013 6:58PM
3 0
profile picture
J_BISCHOF
Posts: 2082 - Karma: 1,449
lol
Nov 19 2013 6:58PM
0 0
profile picture
coling
Posts: 1086 - Karma: -3
Geek squad
Nov 19 2013 6:58PM
0 0
profile picture
broto
Posts: 9039 - Karma: 25,662
you seem to have forgotten to delete system 32
Nov 19 2013 7:00PM
2 0
profile picture
bigbromskier
Posts: 1175 - Karma: 330
already tried all of the above

taking the battery out and putting it back in doesn't produce desired results either. :((

there's gotta be someone that's built a computer that knows this.
Nov 19 2013 7:02PM
0 0
profile picture
Hammyslapwagon
Posts: 1261 - Karma: 1,409
Why not just solder it back on or purchase a new cable? 
Nov 19 2013 7:09PM
0 1
profile picture
bigbromskier
Posts: 1175 - Karma: 330
^I'm trying to figure out if it's that simple-I know nothing about computer circuits and such and don't have a soldering iron. Can you just line up the prongs to make the connection and cover it with soldered metal stuff?

the cord is functional.
Nov 19 2013 7:16PM
0 0
profile picture
Arabian
Posts: 682 - Karma: 1,079
take the keys out of the ignition and pump the brakes
Nov 19 2013 7:33PM
6 0
profile picture
Wallisch_pl
Posts: 5260 - Karma: 1,022
yes










now give me +k
Nov 19 2013 7:42PM
3 1
profile picture
Hammyslapwagon
Posts: 1261 - Karma: 1,409
Well you already said the motherboard itself is intact along with the cable.  IMO, just plug it back in and hold it down with something that won't melt away
Nov 19 2013 8:01PM
0 0
profile picture
Spagett+
Posts: 3499 - Karma: 14,884
Is there a little red ring around it? cause then your fucked.
Nov 19 2013 8:18PM
3 0
profile picture
SFB
Posts: 8895 - Karma: 26,352
wipe it with a clean cloth then put the disk back in.
Nov 19 2013 8:23PM
0 0
profile picture
Agamemnon
Posts: 310 - Karma: 3,402
Eat your wi-fi router
Nov 19 2013 8:32PM
0 0
profile picture
Childstar.
Posts: 1947 - Karma: 2,212
Take it to a local Electronics repair shop. They'll fix it and it'll cost like 15 bucks.

Beats fucking it up for good when you try and solder it yourself and melt everything together.
Nov 19 2013 8:48PM
1 0
profile picture
Parrish
Posts: 8695 - Karma: 1,008
Elmers Glue
Nov 19 2013 9:18PM
0 1
profile picture
CaptainObvious.
Posts: 5712 - Karma: 20,638
*dick
Nov 19 2013 9:21PM
0 0
profile picture
TechnoPotamus
Posts: 11626 - Karma: 3,522
have you tried putting your dick in it?
Nov 19 2013 9:25PM
0 0
profile picture
howlongcanausern
Posts: 4982 - Karma: 1,737
shoulda bought a mac they just work
Nov 19 2013 9:26PM
0 0
profile picture
theBearJew
Posts: 10951 - Karma: 15,633
Did you try hitting it?
Nov 19 2013 9:41PM
0 0
profile picture
SFB
Posts: 8895 - Karma: 26,352
have you tried peeing on it yet?
Nov 19 2013 9:44PM
0 0
profile picture
bigbromskier
Posts: 1175 - Karma: 330
^ yes no yes yes no yes no no no yes

putting it in the microwave didn't work either.
Nov 19 2013 10:44PM
0 0
profile picture
Abc567def
Posts: 8756 - Karma: 801
If you french fry when you are supposed to pizza you're going to have a bad time
Nov 19 2013 11:03PM
0 0
All times are Eastern (-5)