Member of the Month

KilaTsunami
October, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

Cutting down line poles

profile picture
Joe_Fusare
Posts: 42 - Karma: 1,392
I have a pair of line poles (http://www.evo.com/ski-poles/line-skis-tac-2013.aspx?esvaid=30559&esvt=336547-GOUSE341319162&esvadt=9-6095662-4062919-1#utm_source=googlebase&utm_medium=shoppingengine&utm_campaign=googleshopping_pla_paid) and i was wondering if I could cut them down and take the grips off so i can properly shorten them
Aug 28 2013 7:40PM
8 0
profile picture
Threshy
Posts: 444 - Karma: 938
Put them in boiling water and then they will slide right off, then use a pipe cutter or anything that can cut metal tube.
Aug 28 2013 7:49PM
0 0
profile picture
ThundaKilla
Posts: 2859 - Karma: 3,781
^its tough to do that with those grips, its a foam and I'm pretty sure its glued on. Not just a friction fit.
Aug 28 2013 7:55PM
0 0
profile picture
Threshy
Posts: 444 - Karma: 938
Oh my bad I never clicked the link. Yeah not sure about those then.
Aug 28 2013 7:58PM
0 0
profile picture
tomPietrowski
Posts: 7145 - Karma: 17,457
I'm pretty sure most line pea actually attach the grip with a grub screw. See if you can see a screw at the top and biotin o the grip. If you undo those you should be able to just slide the grip off a d shorten the pole as much as you like.

That is how te old line pea were but they may have changed, but check that first.
Aug 28 2013 8:12PM
1 0
profile picture
tomPietrowski
Posts: 7145 - Karma: 17,457
Damn auto correct poles not pea haha.
Aug 28 2013 8:22PM
1 0
profile picture
El_Barto.
Posts: 11661 - Karma: 24,364
Your icon gave me epilepsy
Aug 28 2013 8:29PM
1 0
profile picture
Threshy
Posts: 444 - Karma: 938
Click for larger image
Aug 28 2013 8:34PM
3 0
profile picture
RimJobber
Posts: 3313 - Karma: 10,058
I just stared at it for way longer because of this post.
I saw like 4 different patterns that my brain created from the movement
Aug 28 2013 10:29PM
0 0
profile picture
SnowMiser
Posts: 801 - Karma: 3,150
Threads. I have rasta pins and they're a bit too long for my taste, haven't seriously attempted to cut them down but if an easy method were revealed i might try
Aug 28 2013 10:42PM
0 0
profile picture
s-hand
Posts: 1334 - Karma: 1,800
Not to assert my nerdyness but... you cant "get" epilepsy from a flashing light source.  If you were previously diagnosed with the condition, you would be susceptible to epileptic seizures, but otherwise, the source (the icon in this instance) would have no effect to that nature on you.  Just saying.
Aug 28 2013 11:34PM
0 0
profile picture
El_Barto.
Posts: 11661 - Karma: 24,364
Your post gave me cancer
Aug 28 2013 11:48PM
1 0
profile picture
El_Barto.
Posts: 11661 - Karma: 24,364
ass cancer
Aug 28 2013 11:48PM
0 0
All times are Eastern (-5)