BUCKET CLIPS 3 | A FLINTA Ski Mixtape

Member of the Month

hi_vis360
November, 2024

Online

Welcome to the Newschoolers forums! You may read the forums as a guest, however you must be a registered member to post. Register to become a member today!

MTB Trek Fuel Ex 7 Help?

profile picture
WI_Personallty
Posts: 881 - Karma: 161
I just bought a new trek fuel ex 7 and I've been fooling with some shock settings. I was testing them on a stair set. Nothing to big just a bit farther apart. I think I found a good setting for the air pressure for descent on the CTD Shocks. I'm not sure whats going on now, but I looked the bike over for the brake discs rubbing but didn't see anything. It is possible I broke a bearing?

Thanks for the Help in advance.
Apr 17 2013 12:39PM
4 0
profile picture
Spacekroft
Posts: 1332 - Karma: 41
I would check with your local bike shop usually they can give you pretty solid advice and will take a quick look with out charging you, or try www.pinkbike.com they've got a lot of knowledge on there.
Apr 17 2013 12:44PM
1 0
profile picture
skiierman
Posts: 28699 - Karma: -5,563
Maybe it would help if you actually described what's wrong with your bike instead of telling us what you were doing when something went wrong...
Apr 17 2013 12:50PM
3 0
profile picture
steezburgereddie
Posts: 1059 - Karma: 1,945
Did you buy it from a shop or did you order it.
Apr 17 2013 1:20PM
0 0
profile picture
WI_Personallty
Posts: 881 - Karma: 161
Its not rolling smooth or as fast as it should. I just want to know whether or not I have to spend the money at a shop or if it's just something a bike mechanics noob can fix.
Apr 17 2013 1:20PM
0 0
profile picture
WI_Personallty
Posts: 881 - Karma: 161
shop
Apr 17 2013 1:37PM
0 0
profile picture
skiierman
Posts: 28699 - Karma: -5,563
It could be as easy as your brakes rubbing even though you don't think they are. Loosen the two bolts on the disc brake that attaches it to the frame. Spin the wheel. If it moves more freely, that's your problem. Squeeze the brake to set it in place then tighten it up. If that's not the issue it could be one of the hubs on your wheels. Regardless, you should bring it to a shop if it isn't the brakes.
Apr 17 2013 7:08PM
0 0
profile picture
SOSA69
Posts: 265 - Karma: 185
Take it to the local bike shop they'll give a free check up
Apr 18 2013 9:00AM
0 0
profile picture
steezburgereddie
Posts: 1059 - Karma: 1,945
It probably got bumped a little bit. If you keep replacing brake discs every time one gets bent you will probably be replacing the every other week. It's not that big of a deal.
Apr 18 2013 1:36PM
0 0
profile picture
RimJobber
Posts: 3313 - Karma: 10,058
Bent rotor. You probably clipped it on a step
Apr 18 2013 1:38PM
0 0
profile picture
saskskier
Posts: 4774 - Karma: 10,005
Bring it back to the shop you bought it from. Of they Rent willing to help you out, find a shop that will help you and support them forever.

If you don't know what your doing DON'T START MESSING WITH YOUR BIKE. Bring it to someone who does.
Apr 18 2013 1:43PM
0 0
profile picture
skiierman
Posts: 28699 - Karma: -5,563
Bahahaha, oh yeah? How does one clip a rotor on a step while going down a set of stairs? Also I'm pretty sure that even a blind guy who has never ridden a bike could diagnose a bent rotor...
Apr 18 2013 2:06PM
0 0
All times are Eastern (-5)